Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
Replacing a worn or failing Nissan Versa wheel hub assembly matters for safe handling and steady wheel alignment. If the hub or bearing is noisy, loose, or showing play, you can experience vibration, uneven tire wear, or compromised steering feel. This guide covers seven shortlisted options that meet common fitment and durability needs for the Nissan Versa. We evaluated each pick for long-term durability and installation fit, plus noise prevention and bearing performance, to help you narrow choices quickly.
Looking for other parts? See all Nissan Versa parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | PHILTOP 541003 Rear Wheel Hub Assembly (No ABS) |  |
| Most Popular A crowd favorite that many people choose with confidence | PHILTOP 512373 Rear Wheel Hub Bearing Assembly |  |
| Best Quality Built to a higher standard if you want something more solid | Detroit Axle Front Steering Knuckle Wheel Bearing Hub Assembly Kit for Nissan Versa (Front, Pair) |  |
| Best Budget The cheapest option that still gets the job done reliably | SCITOO Front Wheel Hub Bearing Assembly for 2007–2011 Nissan Versa (front, w/ ABS) |  |
| Most Sold A high-volume bestseller chosen again and again | Nilight Front Wheel Hub Bearing Assembly (513296) for Nissan |  |
| Best Value for Money The sweet spot between price and what you get | Torchbeam 515156 Front Wheel Hub Bearing Assembly with ABS |  |
| Best Overall The best all-around choice for most situations | Detroit Axle Front Wheel Bearing Hub Assembly (pair) for Nissan Versa/Cube/Tiida |  |
1. PHILTOP 541003 Rear Wheel Hub Assembly (No ABS)
| Bearing Type | Ball Bearing |
|---|---|
| Material | 55# Steel and GCr15 Steel |
| Compatible Lubricant | Grease |
| Specification Met | ISO 16949 |
This PHILTOP 541003 rear wheel hub assembly is a direct-fit replacement hub and bearing designed to restore rear wheel support and rotation on compatible Nissan models without ABS. It installs in place of the factory unit and is typically used when a worn bearing or noisy hub requires replacement to stop vibration, rumble, or wheel play. The unit is manufactured from steel and uses a sealed ball-bearing design with grease lubrication, and the listing states it meets ISO 16949 manufacturing standards. In practice that means a straightforward swap for a matching car when the hub flange and bolt pattern align, and users report easy installation and solid fitment. The practical benefits are improved wheel guidance, quieter operation, and a renewed mounting surface for the wheel studs. Limitations are that this specific part is a non-ABS version and fitment must match the Nissan Versa rear hub specification exactly, and professional installation is recommended if you lack mechanical experience.
Best for: Reliability-focused buyers who prioritize restoring factory-level wheel behavior and long-term dependability on a Nissan Versa rear hub replacement.
Less Ideal for: Drivers who need an ABS-equipped hub, those looking for an upgraded performance bearing, or DIYers without experience who prefer plug-and-play repairs with professional support.
- Factory-style sealed ball-bearing design for smooth wheel rotation
- Manufactured to ISO 16949 standard for consistent quality control
- Direct-fit replacement for matching rear hub applications, simplifying installation
- Grease-lubricated bearing reduces maintenance and supports typical driving loads
- This listing is a non-ABS hub so it will not work on Versa applications that require an ABS sensor or tone ring
- Fitment is specific and requires confirming the Nissan Versa rear hub specifications before purchase
Verdict A practical, factory-style non-ABS rear hub assembly option for Nissan Versa owners seeking a reliable, standards-built replacement.
2. PHILTOP 512373 Rear Wheel Hub Bearing Assembly
| Bearing Number | 512373 |
|---|---|
| Material | 55# Steel and GCr15 Steel |
| Specification Met | ISO 16949 |
| Compatible Lubricant | Grease |
This PHILTOP rear wheel hub bearing assembly is a direct-replacement style unit designed to restore wheel rotation and hold the wheel securely in place. It is intended for bolt-on installation where a faulty rear hub needs replacing and ships with the bearing preassembled for faster fit-up. Constructed from heat-treated steels and using roller bearings, the assembly aims to provide quiet operation and reliable recovery performance so the wheel spins smoothly under load. For a convenience-focused buyer the main advantages are the ready-to-install format and reported straightforward fit across compatible applications, which can cut labor time compared with rebuilding a pressed-in bearing. Limitations include the lack of ABS tone ring and no explicit fitment listing for Nissan Versa in the product title or details, so confirm compatibility with your Versa year and rear AWD/drive configuration before buying. Warranty and long-term durability depend on installation and driving conditions rather than any guaranteed lifespan stated here.
Best for: A convenience-driven buyer who prioritizes a ready-to-install replacement that minimizes workshop time and lets them quickly get back on the road.
Less Ideal for: Drivers who require built-in ABS sensor integration or who prefer parts explicitly marketed for Nissan Versa fitment should look for a model that lists the Versa directly.
- Preassembled hub bearing reduces installation time compared with separate-bearing swaps
- Manufactured from hardened steels for durability under normal driving loads
- Roller bearing design aimed at smooth, quiet wheel rotation
- Widely reported correct fit and straightforward installation in similar Nissan applications
- Does not include an ABS tone ring so it is not suitable where the factory hub uses ABS integration
- Product listing does not explicitly name Nissan Versa, so fit must be double-checked before purchase
Verdict A practical, preassembled replacement hub for quick rear-hub repairs, but confirm Versa compatibility and ABS needs before buying.
3. Detroit Axle Front Steering Knuckle Wheel Bearing Hub Assembly Kit for Nissan Versa (Front, Pair)
| Fitment | 2013-2019 Nissan Versa; 2014-2019 Nissan Versa Note |
|---|---|
| Kit contents | Pair of front steering knuckle wheel bearing hub assemblies |
| Manufacturer | Detroit Axle |
| Manufacturer part number | KA935009_KA935010 |
This Detroit Axle kit supplies both front steering knuckles with preinstalled wheel hub bearings intended to replace worn or damaged front hubs on Nissan Versa models. The assemblies arrive fully assembled so installation avoids pressing bearings and reduces labor time; they bolt in place and are typically used when a noisy or loose front hub needs replacement. Notable features include electrocoated knuckles for improved corrosion resistance and bearing steel rated for road use, plus design aimed to match factory fit and handling characteristics. Practical benefits are easier installation for DIYers or shops, restored steering stability, and fewer alignment surprises when fitted correctly. Some buyers report excellent fit and long service, while others have experienced premature bearing failure and difficulties with warranty claims, so quality can vary between units and dealer support may be inconsistent. Expect to get near-factory performance if the parts match your vehicle and are installed with correct alignment and torque procedures.
Best for: Performance-oriented buyers who prioritize restoring factory steering feel and handling on a Nissan Versa and want a high-quality, ready-to-install front hub solution that reduces shop time.
Less Ideal for: Buyers seeking an exact OEM-sourced part with manufacturer-backed support or those unwilling to accept some variability in aftermarket part lifespan should consider alternatives.
- Comes as fully assembled knuckle and hub units so no bearing press is required
- Electrocoated knuckle and bearing steel for improved corrosion resistance
- Designed to match factory fit, form, and function for Nissan Versa front end
- Includes both driver and passenger side hubs for a complete front replacement
- Some buyers report premature bearing failures and inconsistent quality between units
- Warranty and replacement experience has been reported as difficult by some customers
Verdict A ready-to-install, factory-fit front hub and knuckle kit that can restore Versa steering performance quickly but with some variability in long-term bearing durability.
4. SCITOO Front Wheel Hub Bearing Assembly for 2007–2011 Nissan Versa (front, w/ ABS)
| Compatible years/vehicle | 2007-2011 Nissan Versa |
|---|---|
| Position | Front |
| Lug count | 4 Lugs |
| Includes ABS tone ring | W/ABS |
| OEM reference | Replaces 513308 |
This SCITOO front wheel hub assembly is a direct replacement intended for 2007–2011 Nissan Versa vehicles with ABS and a 4-lug front axle. It installs in place of the factory hub and is typically used when a worn or noisy bearing causes vibration, noise, or an ABS tone ring issue. The part is precision-machined and shipped as a complete hub bearing assembly, which simplifies installation compared with rebuilding the bearing separately. Buyers will appreciate that it addresses common symptoms quickly and that SCITOO recommends replacing hubs in pairs for balanced performance. Expect a budget-friendly alternative to factory replacements that can restore smoothness and eliminate growling or vibration. Limitations to note are typical of aftermarket hubs: long-term durability can vary from OEM, and correct torque and installation technique are important to avoid premature failure. This unit is best for cost-conscious owners comfortable with aftermarket parts and proper installation practices.
Best for: Budget-conscious Nissan Versa owners who prioritize restoring quiet, vibration-free driving on a tight budget and are comfortable using aftermarket replacement parts.
Less Ideal for: Owners looking for a long-term, dealer-level factory replacement or those who prefer OEM-sourced parts and extended durability assurances.
- Direct-fit replacement for 2007–2011 Nissan Versa front hub with ABS and 4 lugs.
- Ships as a complete hub-bearing assembly, eliminating the need to press in a separate bearing.
- Precision-machined surfaces aimed at reducing noise and vibration after installation.
- Clear guidance to replace hubs in pairs to maintain balanced vehicle handling.
- Aftermarket construction may not match long-term durability of the factory unit.
- Installation requires correct torque and procedures to avoid premature bearing failure.
Verdict A cost-effective, ready-to-install front hub assembly for 2007–2011 Nissan Versa that restores smoothness quickly but may not match OEM longevity.
5. Nilight Front Wheel Hub Bearing Assembly (513296) for Nissan
| Material | Alloy Steel |
|---|---|
| Bearing Type | Roller Bearing |
| Pre-Greased | Yes |
| Wheel Studs | 5-Lug |
This Nilight front wheel hub bearing assembly is a pre-greased, 5-lug front hub meant as a factory-replacement style unit for applicable Nissan vehicles. It installs in place of the factory hub and is used to restore wheel mounting, bearing function, and driving stability. Key features called out include an alloy steel construction, pre-greased roller bearing, and a 4-hole flange with five wheel studs. In practice the assembly should simplify a hub swap because it arrives ready to install and does not require pressing a separate bearing. Many buyers report straightforward fit and improved handling after replacement, while the pre-greased bearing reduces initial service steps. Important limitations are mixed quality-control reports from users and the absence of a speed sensor, so if your vehicle requires an ABS tone ring or integrated sensor you will need a different part or additional components. For a risk-averse buyer focused on returning the car to stable, factory-like operation, this unit offers a practical, ready-to-install option provided you confirm exact Nissan fitment and sensor requirements.
Best for: A risk-averse mainstream buyer who wants a straightforward, factory-replacement style hub to restore safe, predictable handling on their Nissan and prefers a ready-to-install part over rebuilding a bearing.
Less Ideal for: Anyone who needs an integrated ABS speed sensor or a hub with specific OEM sensor features should choose a part that includes those components or purchase the sensor separately.
- Pre-greased bearing reduces installation prep and initial maintenance
- Made from alloy steel for corrosion resistance and durability
- Direct-replacement hub design simplifies swapping without separate bearing press
- Includes five wheel studs and a 4-hole flange for standard mounting
- Does not include a speed/ABS sensor or tone ring
- Customer reports show inconsistent quality control on some units
Verdict A ready-to-install, pre-greased front hub that restores factory-style wheel mounting for compatible Nissans but verify ABS sensor needs and inspect units for quality consistency.
6. Torchbeam 515156 Front Wheel Hub Bearing Assembly with ABS
| Bearing Number | 515156 |
|---|---|
| Specification Met | ISO 16949 |
| Bearing Type | Ball Bearing |
| Compatible Lubricant | Grease |
This Torchbeam wheel hub assembly is a complete front hub bearing unit that replaces the factory part and restores bearing function and ABS sensor input. It is used as a direct-replacement hub when a worn or noisy bearing needs repair; the unit includes the hub, bearing and integrated studs so installation is a straightforward swap at the knuckle. The listing highlights hardened bearing steel, a rust-resistant finish, and triple oil seals intended to keep moisture and road contamination out, which should reduce noise and extend service life compared with a bare bearing swap. Practical installers will appreciate the integrated design that eliminates pressing bearings in and out. Limitations are that this is an aftermarket replacement rather than a dealer part and proper fit and sensor wiring orientation must be confirmed for the Nissan Versa before installation; if you are not experienced with wheel-end service a shop should handle the job. Follow torque and bearing preload procedures to avoid premature wear.
Best for: Practical optimizers looking to repair the front wheel end on a Nissan Versa who prioritize a ready-to-install, cost-effective replacement that reduces labor and avoids bearing pressing.
Less Ideal for: Buyers who want dealership parts with guaranteed factory sourcing or technicians who need vehicle-specific stamped OEM part numbers for warranty documentation should consider other options.
- Complete hub assembly simplifies installation compared with pressed-in bearings
- High-carbon bearing steel and hardened outer ring for improved surface hardness
- Rust and corrosion protected finish for longer service life
- Triple oil seal and improved sealing to reduce contamination and noise
- Aftermarket unit so fitment and ABS sensor connector routing should be verified for the Versa before install
- Does not include installation hardware like spindle nuts in every package
Verdict If you need an affordable, ready-to-install front hub to get a Nissan Versa back on the road without pressing bearings, this Torchbeam assembly is a practical choice.
7. Detroit Axle Front Wheel Bearing Hub Assembly (pair) for Nissan Versa/Cube/Tiida
| Position | Front Left and Right |
|---|---|
| Lugs | 4 Bolt |
| ABS on Hub | Encoder |
| Drive Type | FWD |
| Bearing Type | Ball Bearing |
This Detroit Axle kit supplies two front wheel bearing and hub assemblies engineered to replace the factory units on compatible Nissan Versa, Cube, and Tiida models. Intended for front-left and front-right installation on FWD cars, each hub includes a built-in ABS encoder and the correct 4-bolt lug pattern and 3-bolt triangular flange to match factory mounting. Buyers install these when a worn bearing, noisy hub, or intermittent ABS faults require replacement; the assemblies come preassembled to speed swap-out and reduce shop time. Practical benefits include direct-fit hardware locations, grease-compatible ball bearings, and a claimed 10-year spare part availability that suggests long-term support. Some reviews report consistently good fit and quiet operation after break-in, while a minority cite early failures or sensor fit issues, so professional installation and inspection of ABS sensor fitment is recommended. This is a budget-friendly aftermarket alternative to a new factory unit that aims to match function and restore drivability, but results can vary between individual parts and vehicles.
Best for: A balanced all-round buyer who wants a ready-to-install, affordable factory-replacement hub assembly to restore ride quality and ABS function on a Nissan Versa-class vehicle without overpaying for dealer parts.
Less Ideal for: Drivers who require guaranteed OEM-level longevity for high-mileage or heavy-duty use should consider remanufactured OEM hubs or dealer parts with direct factory warranty coverage.
- Sold as a pair for front left and right replacement to simplify repairs
- Includes integrated ABS encoder so ABS and traction functions can be restored without separate sensors
- Preassembled hub and bearing reduces installation time compared with packing bearings separately
- Designed to match factory mounting pattern (4-lug, 3-bolt flange) for direct fit on specified models
- Some customers reported early failures on individual units, indicating occasional quality variability
- A few reviews noted ABS sensor fitment or missing parts issues requiring modification or vendor follow-up
Verdict A cost-effective, direct-fit hub assembly pair that restores wheel bearing and ABS function on compatible Nissan Versa-family models but watch for occasional quality inconsistencies.
Choosing the Right Nissan Versa Wheel Hub Assembly: Key Factors to Consider
Fitment and Vehicle Specificity
Correct fitment is essential because the wheel hub assembly must match Nissan Versa mounting points, bolt pattern, and bearing dimensions. An exact fit reduces installation time and the risk of alignment issues after replacement.
When the assembly is designed specifically for the vehicle, you avoid modifications and ensure the ABS tone ring, if present, lines up correctly. Confirming fitment up front prevents problems like uneven brake rotor contact or incorrect wheel offset that can affect handling and tire life.
Bearing Sealing and Longevity
High-quality seals keep out water, dirt, and road salt, which are the main causes of premature bearing failure. A well-sealed bearing maintains lubricant and reduces contamination, extending service life under varied driving conditions.
Vehicles driven in wet or coastal areas benefit most from robust sealing. Choosing assemblies with proven sealing designs reduces the likelihood of noise, play, and the need for repeat replacements.
Material Quality and Corrosion Resistance
The hub material and coatings determine resistance to rust and mechanical wear. Hubs exposed to moisture and de-icing chemicals perform better when made from durable metals and treated with anti-corrosion finishes.
Better material quality also supports consistent torque retention at mounting fasteners and prevents degradation that can lead to wobble or failure. For long-term reliability, prioritize assemblies with clear specifications about materials and protective coatings.
Noise and Vibration Characteristics
Bearing smoothness and proper preload affect the amount of noise and vibration transmitted to the cabin. Assemblies designed and machined to tight tolerances typically run quieter and reduce wheel hub noise grinding or humming.
Noise symptoms often appear before catastrophic failure, so selecting hubs with low vibration profiles helps maintain comfort and may indicate better overall manufacturing control. Look for references to quiet operation and vibration minimization in product information.
Integration and Ease of Installation
Some assemblies come fully integrated with the bearing, hub, and mounting hardware, simplifying installation and lowering labor time. Integration reduces the number of steps and special tools required to complete a replacement on a Nissan Versa.
Consider whether the unit includes necessary components like ABS tone rings or wheel studs. A more complete assembly decreases the chance of missing parts during installation and improves repeatability for DIYers or technicians.
Torque Specifications and Serviceability
Knowing and following the correct wheel hub assembly torque specs is critical to prevent overloading the bearing or leaving fasteners loose. Proper torque preserves bearing preload and ensures safe fastening of the hub to the vehicle.
Choose assemblies that are compatible with standard service procedures for the Nissan Versa and that do not require uncommon tools or one-time-use components. Good serviceability reduces maintenance time and error during future inspections or replacements.
FAQ
What are common signs that my Nissan Versa wheel hub assembly needs replacement?
Common signs include a grinding or humming noise from the wheel area, looseness or play when the wheel is rocked, uneven tire wear, and vibration during driving. You may also notice ABS warning lights if the tone ring or sensor is affected. Inspection by a qualified technician can confirm whether the hub assembly or another component is the cause.
Can I replace a Nissan Versa wheel hub assembly myself?
Many mechanically inclined owners can replace a hub assembly with basic tools and a service manual. The process usually involves removing the wheel, brake components, and axle or driveshaft fasteners as applicable. Take care to follow torque specifications and safety procedures, and be prepared to use a jack and stands or lift. If you are unsure about any step, professional assistance is advisable.
How long should a typical wheel hub assembly last on a Nissan Versa?
Service life varies with driving conditions, but a properly sealed and installed hub can last many years under normal driving. Exposure to water, road salt, and heavy loads can shorten lifespan. Regular inspections for noise, play, and seal condition help catch issues early before bearing failure occurs.
Will a bad wheel hub assembly affect my Nissan Versa’s steering or braking?
Yes, a failing hub can affect steering precision and may cause vibration that alters brake feel. In extreme cases, wheel play can change alignment and increase stopping distance. Addressing symptoms promptly helps maintain predictable steering and braking performance.
Should I replace front and rear wheel hub assemblies at the same time?
It depends on condition and mileage. If only one hub shows wear or symptoms, replacing just that unit can be appropriate. However, if multiple hubs exhibit similar age-related wear, replacing both sides of an axle at once can ensure balanced performance and reduce the chance of repeat labor.
What maintenance reduces the risk of premature wheel hub failure?
Avoid driving through deep water when possible, and rinse undercarriage salt and grime after winter exposure. Regularly inspect for loose wheel bearings, torn seals, or unusual noises. Keeping brake components in good condition also prevents contaminants from reaching the hub area.
How We Chose the Best Nissan Versa Wheel Hub Assembly
We selected products that meet the needs of Nissan Versa owners by focusing on concrete, vehicle-specific performance factors. Key evaluation criteria included bearing life and sealed design for longevity; factory-equivalent fitment and mounting accuracy to ensure straightforward installation on the Nissan Versa; corrosion resistance and durable hub materials to withstand road conditions; preload and tolerance control to minimize wheel play and vibration; and noise and smooth-rolling characteristics to reduce grinding and humming during operation. We also considered ease of installation, such as whether the assembly integrates the bearing and hub to reduce labor steps. Items excluded from consideration were universal or multi-vehicle hubs without clear Nissan Versa-specific fitment, assemblies lacking sealed bearings, and products with insufficient manufacturing or quality documentation. The result is a focused list of assemblies that prioritize fit, longevity, and quiet operation for the Nissan Versa rather than broad compatibility or lowest cost.
Our full evaluation process is outlined in our review methodology.
Conclusion
Prioritize assemblies that match Nissan Versa fitment exactly, offer robust sealing, and use durable materials to ensure quiet, long-lasting operation. Consider ease of installation and whether the unit includes integrated components to minimize labor and fitment risk. Balance noise and vibration performance against durability when selecting a hub. Following proper torque specifications and routine inspection will help maintain safe steering and prevent premature bearing failure.
Explore More:
- Check out all Nissan Versa parts & accessories
- Explore Wheels & Tires
- Browse all Auto Parts
