Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If your Acura TLX shows vibration, noise, or uneven tire wear, the wheel hub assembly is a common culprit that affects handling and safety. Choosing the right assembly matters because it integrates the bearing, mounting flange, and wheel studs into one component that directly influences ride smoothness and steering stability. This guide covers the seven shortlisted wheel hub assemblies selected as top picks for the Acura TLX. We evaluated each option on durability, bearing precision, and fitment reliability so you can quickly narrow down replacements that suit your driving needs. Read on to see the evaluation criteria and what to watch for when choosing an assembly.
Looking for other parts? See all Acura TLX parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | MOOG 512544 Wheel Bearing and Hub Assembly for Honda/Acura |  |
| Most Popular A crowd favorite that many people choose with confidence | Detroit Axle Rear Wheel Bearing & Hub Assembly (5-Lug) for Acura TLX / Honda Accord (Gas) |  |
| Best Quality Built to a higher standard if you want something more solid | A-Premium Front Left Steering Knuckle with Hub and Bearing Assembly |  |
| Best Budget The cheapest option that still gets the job done reliably | maXpeedingrods Rear Wheel Bearing and Hub Assembly (fits Acura TLX 2015–2020, 5-lug) |  |
| Most Sold A high-volume bestseller chosen again and again | TRQ Rear Wheel Bearing and Hub Assembly Set, 2-Piece |  |
| Best Value for Money The sweet spot between price and what you get | Detroit Axle Pair Front Wheel Hub and Bearing Assembly (5-Lug) with ABS Encoder |  |
| Best Overall The best all-around choice for most situations | Aeagle Front Right Steering Knuckle and Wheel Hub Assembly (Passenger Side) |  |
1. MOOG 512544 Wheel Bearing and Hub Assembly for Honda/Acura
| Brand | MOOG |
|---|---|
| Material | Alloy Steel |
| Bearing Number | 512544 |
| Bearing Type | Wheel Bearing |
| Compatible Lubricant | Grease |
This MOOG hub assembly replaces the wheel bearing and hub as a single unit to restore safe wheel rotation and ABS sensor alignment on compatible Honda and Acura vehicles. It is typically used as a direct replacement during front or rear hub repairs when noise, vibration, or ABS warnings indicate bearing failure. Notable features include a roll-form bearing to maintain proper preload, quad-lip seals to keep out water and debris, and coated wheel studs to resist rust and make future removal easier. In practice the part installs quickly and eliminates the need to press a separate bearing into the hub, which speeds DIY or shop labor. MOOG emphasizes application-specific raceway design for longer service life, but longevity still depends on driving conditions and installation quality. The assembly is a solid factory-quality replacement, though buyers should confirm vehicle-year fitment before purchase and expect professional-level tools for removal of the old hub on some vehicles.
Best for: A reliability-focused buyer who prioritizes a durable, factory-quality replacement to restore safe wheel operation and minimize return visits for the Acura TLX.
Less Ideal for: Buyers looking for the cheapest short-term fix or those who need a universal part for multiple vehicle models should consider other options.
- Integrated hub and bearing simplifies installation and removes need for pressing bearings
- Quad-lip seal design reduces moisture and debris intrusion
- Roll-form bearing and application-specific raceway for consistent preload and reduced wear
- Coated wheel studs resist rust for easier future removal
- Requires proper tools and sometimes heat or a slide hammer to remove the old hub assembly
- Fitment must be verified vehicle-by-vehicle to avoid ordering the wrong application
Verdict A durable, application-specific hub assembly that gives reliability-focused TLX owners a near-factory replacement with easier installation compared with separate bearing-and-hub repairs.
2. Detroit Axle Rear Wheel Bearing & Hub Assembly (5-Lug) for Acura TLX / Honda Accord (Gas)
| Fitment | 2015-2020 Acura TLX (FWD); select 2013-2015 & 2018-2023 Honda Accord (GAS) |
|---|---|
| Lugs | 5 Bolt |
| ABS Type | Encoder |
| Material | Carbon Steel |
| Specification Met | ISO 16949 |
This Detroit Axle rear wheel bearing and hub assembly replaces the rear left or right hub on FWD Acura TLX (2015–2020) and specified gasoline Honda Accord years. It arrives as a complete hub assembly with a built-in ABS encoder, so installation replaces the worn hub and the wheel speed sensor interface in one step. For routine repairs this part is used when you hear bearing noise, experience rough rotation, or have ABS/traction warnings tied to a faulty sensor. The steel construction and ISO 16949 spec suggest factory-style manufacturing consistency, and owners report straightforward fitment and quiet operation after installation. It does not include mounting bolts, which means you may need to source hardware separately during a repair. While it covers common gas-model fitments and comes with a long warranty, this unit is not for hybrid or SH-AWD TLX models, so confirm drivetrain before ordering.
Best for: Convenience-driven buyers who prioritize a straightforward, drop-in repair that restores wheel rotation and ABS function with minimal parts sourcing and shop time.
Less Ideal for: Buyers with hybrid or SH-AWD Acura TLX models or those who prefer a rebuild/press-in bearing approach should look for a different part or service option.
- Integrated ABS encoder eliminates a separate wheel speed sensor replacement step.
- Complete hub assembly simplifies installation compared with pressed-in bearing jobs.
- Made to ISO 16949 manufacturing standards for consistent aftermarket quality.
- Multiple user reports of good fit and quiet operation after installation.
- Mounting bolts are not included, so additional parts may be required for installation.
- Not compatible with hybrid or SH-AWD drivetrain variants of the TLX.
Verdict A convenient, factory-style replacement hub with built-in ABS encoder for gas FWD TLX owners who want a quick, reliable drop-in repair.
3. A-Premium Front Left Steering Knuckle with Hub and Bearing Assembly
| Vehicle Fitment | Honda Accord 2008-2012; Acura TSX 2009-2014 |
|---|---|
| Position | Front Left (Driver Side) |
| Material | Alloy Steel |
| Bearing Type | Ball Bearing |
This loaded steering knuckle arrives as a ready-to-install front-left assembly that combines the knuckle, wheel hub and pre-installed bearing to restore steering and wheel support. It is used when worn bearings, hard braking, wheel vibration, or uneven tire wear indicate a failed hub/knuckle; fitment notes list compatibility with 2008–2012 Honda Accord and 2009–2014 Acura TSX, and the package includes a dust shield and hub hardware. The steel construction and ball bearing are presented as meeting or exceeding factory specifications and most buyers report straightforward fit and improved drivability after replacement. Practical benefits include saving time by replacing the entire loaded knuckle instead of pressing a new bearing, and reduced breakout work for alignment and wheel mounting. Limitations: some units ship with mismatched axle nut size or lightweight fasteners, so expect to reuse OEM nuts or source stronger hardware; installation still requires automotive tools and torque accuracy to avoid premature wear.
Best for: Performance-oriented buyers who prioritize restoring precise steering response and reducing downtime will appreciate a preloaded knuckle that lets a skilled DIYer or shop replace the hub assembly quickly and get the TLX back on the road with tightened steering feel.
Less Ideal for: Buyers looking for a plug-and-play solution without tools or professional installation help, or those who want every associated fastener included, should consider a professional installation service or a kit that explicitly supplies OEM-equivalent nuts and bolts.
- Complete loaded assembly includes knuckle, hub and pre-installed bearing for faster replacement
- Steel construction and ball bearing designed to meet or exceed factory specifications
- Dust shield included to help protect the bearing from road contamination
- Multiple customer reports of correct fit and improved steering feel after installation
- Some shipments include the wrong axle nut size or lower-quality supplied nuts requiring reuse of OEM hardware or replacement
- No axle or half-shaft included so additional parts may be needed for a full drivetrain service
Verdict A practical, performance-focused loaded steering knuckle that speeds repair and restores steering feel but expect to reuse or replace certain fasteners during installation.
4. maXpeedingrods Rear Wheel Bearing and Hub Assembly (fits Acura TLX 2015–2020, 5-lug)
| Application | Acura TLX 2015-2020 FWD rear |
|---|---|
| Lugs | 5 Bolt |
| ABS Type | Encoder |
| Position | Rear left or right |
This hub-and-bearing assembly provides a direct replacement for the rear left or right on Acura TLX 2015–2020 FWD models. It combines the bearing and wheel hub with an integrated ABS tone ring so you can swap the entire unit without separate bearing press work. Typical use is a brake or wheel-end repair to eliminate noise, vibration, or looseness; installation is a straightforward bolt-in job when you follow service procedures. The listing specifies forged steel construction and claims OEM-matching fitment for 5-lug wheels, which translates to solid mounting and reduced road noise compared with a worn hub. Included flange and stud locations match the TLX pattern and the built-in encoder tone ring preserves ABS function after replacement. Limitations are that longevity depends on installation torque and driving conditions, and this is an aftermarket part rather than a factory brand, so buyers should expect variable long-term durability versus a dealer-sourced unit.
Best for: Budget-conscious TLX owners looking for a low-cost, practical replacement that restores quiet operation and ABS function without specialty tools.
Less Ideal for: Owners seeking an exact factory-branded part or who prioritize dealer warranty coverage and long-term proven durability should consider dealer-sourced replacements instead.
- Direct-fit replacement for Acura TLX 2015–2020 rear hub positions left or right
- Integrated ABS tone ring preserves wheel speed sensor function without modification
- Forged high-grade steel construction for smoother rotation and reduced vibration
- Sold as a complete hub assembly so no bearing press is required during installation
- Aftermarket part so long-term durability may vary compared with factory-brand replacements
- Fit and finish can depend on installation technique and wheel torque settings
Verdict A wallet-friendly, bolt-in rear hub assembly that restores quiet, ABS-compatible operation on Acura TLX 2015–2020 FWD models while trading off the assurance of a factory-branded unit.
5. TRQ Rear Wheel Bearing and Hub Assembly Set, 2-Piece
| Compatible models | Acura TLX 2021-2023 base model rear |
|---|---|
| Quantity | 2 piece kit (left and right rear) |
| Bearing type | Ball Bearing |
| Compatible lubricant | Grease |
This TRQ two-piece rear wheel bearing and hub assembly set replaces both left and right rear hubs on compatible Acura TLX base models and is intended as a direct-fit, factory-quality replacement. Installation is straightforward for a competent DIYer or professional technician because the assemblies arrive pre-assembled to match factory fitment and eliminate the need for bearing press work. TRQ highlights grease-compatible ball bearings and machined exterior surfaces that help reduce vibration and road noise after installation. The kit includes parts referenced to factory numbers for easier verification. Expect practical benefits like time saved during the job, restored wheel stability, and the potential to clear wheel-bearing noise or play. However, some users report occasional quality-control variability and fitment issues like mismatched wheel studs on certain applications, so inspect parts on arrival and be prepared to reuse original studs if needed.
Best for: Risk-averse mainstream buyers who prioritize a near-factory replacement and want a ready-to-install solution that minimizes garage time and repair uncertainty for their Acura TLX.
Less Ideal for: Owners seeking premium OE-brand longevity or those who prefer to upgrade to a heavy-duty or performance hub should consider higher-end alternatives or OEM factory parts.
- Direct-fit replacements for rear left and right wheel hubs on specified Acura TLX base models
- Pre-assembled hub and bearing design reduces installation time and the need for special pressing tools
- Machined exterior and factory-referenced part numbers simplify fitment verification and improve sealing against contaminants
- Some reported variability in quality control across units
- Occasional mismatch with wheel stud length or thread requiring reuse of original studs
Verdict A practical, ready-to-install rear hub and bearing pair that restores factory-style fit and function for Acura TLX owners, but inspect parts on arrival for occasional fitment or quality variations.
6. Detroit Axle Pair Front Wheel Hub and Bearing Assembly (5-Lug) with ABS Encoder
| Bearing Number | 513267 |
|---|---|
| Lugs | 5 Bolt |
| ABS Type | Encoder |
| Fitment (listed) | Front Left and Right – compatible applications listed in product details |
This Detroit Axle pair is a fully assembled front wheel hub and bearing kit meant to replace worn units and restore wheel rotation and ABS function. It arrives as a bolt-on assembly with the bearing preinstalled and an integrated ABS encoder, so installation requires no pressing of bearings and is straightforward for a competent DIYer or a shop. The listing emphasizes hardened bearing steel and high-frequency quenching to resist wear and corrosion, which should extend service life under everyday driving. Buyers get two hubs with 5-lug pattern and encoder rings, useful when both sides need replacement or when an ABS sensor ring is damaged. Common real-world benefits reported by users include quieting bearing noise, eliminating ABS warning lights, and a close factory-quality fit. Limitations to expect are occasional packaging or sensor damage in transit and the possibility of receiving only one unit if the order is mishandled, so inspect parts on arrival before installation.
Best for: Practical optimizers who prioritize getting reliable, factory-style replacements at a lower total cost and prefer parts they or their independent shop can install without special bearing-press tooling.
Less Ideal for: Buyers who need guaranteed pristine OEM packaging or those seeking brand-new factory-original parts from the dealership should consider alternatives.
- Comes as complete bolt-on assemblies so no bearing press is needed
- Integrated ABS encoder restores wheel speed sensing without extra parts
- Manufactured to factory-style specifications with heat-treated bearing steel for wear resistance
- Supplied as a matched pair allowing simultaneous replacement of both front hubs
- Some customers reported shipping damage to the ABS sensor area on arrival
- Occasional fulfillment errors reported where only one hub arrived instead of a pair
Verdict A cost-effective, ready-to-install pair of front hub assemblies with ABS encoder rings that gives DIYers and independent shops a near-factory replacement at a much lower cost, but check parts immediately for transit damage.
7. Aeagle Front Right Steering Knuckle and Wheel Hub Assembly (Passenger Side)
| Installation position | Front right passenger side |
|---|---|
| Compatible models | Acura TSX 2009-2014; Honda Accord 2008-2012 |
| Manufacturer part number | AESTK010-Q1FR |
This steering knuckle comes as a complete front-right (passenger side) assembly with the wheel bearing hub preinstalled to simplify replacement on compatible vehicles. It is intended for direct-fit swaps where the knuckle or hub has failed due to corrosion, bearing noise, or wheel vibration. Notable features called out by the manufacturer include an anti-corrosion finish, factory-quality replacement components, and reduced noise and vibration from the integrated bearing. For a DIY mechanic or a shop performing a repair, the assembled unit saves the time and risk of pressing a separate bearing in and out and often means fewer alignment concerns after installation. Some buyers noted occasional issues with supplied fasteners and the dust shield not preinstalled, so you may need to reuse original nuts or source correct hardware. If a single component in the steering knuckle fails later, replacing the whole assembly is more costly than swapping only the bearing, but the assembly route is faster and usually more reliable for older cars.
Best for: Balanced buyers who prioritize an easier, time-saving repair and reliable fitment for mid-2000s Acura/Honda platforms and prefer replacing an entire hub/knuckle assembly instead of servicing individual parts.
Less Ideal for: Drivers who want the lowest parts cost and plan to replace only a single bearing or who require OEM-specified fasteners included with the part should consider sourcing separate components instead.
- Complete front-right knuckle with preinstalled wheel bearing hub reduces labor and avoids bearing press work
- Anti-corrosion finish for longer service life in road conditions prone to rust
- Designed as a direct replacement for specified vehicle years to simplify selection and fitment
- Integrated assembly typically reduces wheel vibration and noise compared with a worn knuckle and loose bearing
- Some customers reported incorrect or missing hardware such as axle nut size or insufficient cotter pins
- Occasional reports of early failure on individual components like the ball joint, indicating possible quality variance
- Dust shield may not be installed, requiring extra steps during installation
Verdict This assembled front-right knuckle/hub is a practical, time-saving direct-replacement for mid-2000s Acura and Honda models, best for buyers who value convenience and reliable fit over swapping individual parts.
Choosing the Right Acura TLX Wheel Hub Assembly: Key Factors to Consider
Bearing Precision and Play
Proper bearing tolerance directly affects noise, vibration, and steering feel. Bearings with excessive internal play allow the wheel to move under load, which shows up as looseness at the steering wheel, uneven tire wear, and potential handling instability.
When assessing assemblies, look for specifications or construction notes indicating low tolerance or preloaded bearings. Even small differences in bearing clearance can change the perceived smoothness of the ride and the expected service life, so bearing precision is a key determinant of long-term performance.
Seal Design and Contaminant Protection
Seals keep out water, road salt, and debris that accelerate bearing failure. A robust sealing arrangement prevents lubricant loss and contamination, which are common causes of early hub assembly failure, especially in areas with frequent wet driving or winter road treatments.
Consider assemblies with multi-lip seals or integrated labyrinth designs that reduce ingress. Better seals often translate into longer intervals between replacements and more consistent performance over time.
Fitment and Mounting Integrity
Correct fitment ensures the hub aligns with the vehicle's knuckle, brake rotor, and wheel studs without forcing components into improper positions. Precise mounting dimensions and accurate stud patterns reduce stress on fasteners and maintain correct wheel alignment.
Assemblies that match factory mounting interfaces minimize installation adjustments and help avoid issues like hub runout, premature rotor wear, and uneven torque distribution. Always verify the part's specifications against the Acura TLX mounting points to ensure a secure, correct fit.
ABS Sensor Compatibility
Many modern vehicles, including the Acura TLX, rely on wheel speed signals for ABS and stability control systems. Assemblies that incorporate the proper ABS tone ring or sensor interface prevent error codes and maintain safety system performance.
If the hub assembly does not include the correct sensor interface, additional components or sensor reprogramming may be necessary. Ensuring compatibility avoids diagnostic lights and preserves the functioning of driver assistance systems that depend on wheel speed data.
Material Strength and Corrosion Resistance
Hubs are exposed to road debris, salt, and mechanical loads, so material choice and surface treatment matter. Strong hub flanges resist bending and cracking under load, while corrosion-resistant coatings slow degradation that can seize fasteners or impair fit over time.
Opting for assemblies with hardened steel components and protective finishes improves longevity and reduces the likelihood of extraction difficulties during future service. Material robustness also contributes to consistent wheel alignment and structural safety.
Installation Considerations and Serviceability
An assembly designed for straightforward installation lowers the risk of installation errors that can shorten service life. Features like included hub nuts, compatible studs, or pre-pressed bearings reduce the number of steps and tools required.
Ease of serviceability also matters for future repairs. Parts that allow for clear torque procedures and accessible mounting points help technicians achieve correct clamping force and alignment, which supports reliable performance and reduces the chance of rework.
FAQ
What are common signs the Acura TLX wheel hub assembly needs replacement?
Common signs include persistent wheel vibration, rumbling or grinding noises from the wheel area, uneven tire wear, and looseness or play felt in the steering wheel. Some drivers also notice ABS warning lights if the hub's tone ring or sensor interface is failing. These symptoms often appear gradually and may worsen with speed or load.
Can I replace just the bearing instead of the entire hub assembly on an Acura TLX?
In some cases bearings can be serviced separately, but modern designs often use integrated assemblies where the bearing is pre-pressed into the hub. Replacing the entire assembly is usually simpler and reduces the risk of incorrect press-fit or contamination during installation. The best choice depends on the specific hub design and available tools.
How long does a wheel hub assembly typically last in regular driving?
Lifespan varies with driving conditions, but assemblies often last many tens of thousands of miles under normal use. Exposure to heavy moisture, road salt, or frequent impacts can shorten service life. Regular inspections for play, noise, and seal condition help identify wear before it becomes a safety issue.
Will a failing hub assembly affect braking or ABS performance?
Yes, a compromised hub assembly can impact braking by increasing rotor runout and causing uneven pad contact. If the hub assembly includes the ABS tone ring or sensor interface and it is damaged, wheel speed signals may be incorrect, which can trigger ABS warnings or affect braking modulation. Maintaining correct hub function supports reliable braking behavior.
Are there installation steps that reduce the chance of premature hub failure?
Proper torqueing of mounting fasteners, using the correct hub nuts, and following manufacturer torque sequences help avoid excess preload or looseness. Ensuring the mounting surface is clean and free of corrosion improves seating, and using thread locking where specified prevents fastener back-off. These practices reduce the chance of installation-related failures.
How We Chose the Best Acura TLX Wheel Hub Assembly
Our selection focused on parts that provide reliable service for the Acura TLX while minimizing premature bearing wear and fitment problems. We prioritized assemblies with strong bearing tolerance and sealed designs that resist contaminants, as these aspects have the biggest impact on longevity in everyday driving. Mounting integrity and correct stud pattern were essential filters because poor fitment leads to installation issues and safety risks. We also examined material quality for the hub flange and the durability of corrosion-resistant finishes, since structural strength matters for absorbing road loads. Additional criteria included compatibility with factory ABS sensor interfaces and ease of installation, which reduces the chance of installation-related failures. We excluded kits that lack complete mounting hardware or do not explicitly match Acura TLX specifications. We did not consider items sold only as bearings without the hub assembly, since integrated assemblies reduce labor and alignment risk. Overall, we filtered for durability, precise bearing play, correct fitment, sealed protection, ABS compatibility, and installation readiness.
Our full evaluation process is outlined in our review methodology.
Conclusion
When selecting a wheel hub assembly for an Acura TLX, prioritize bearing precision, correct fitment, and robust sealing to maximize durability and maintain steering and braking performance. Balance material strength and ABS compatibility with installation ease to reduce risk of fitment issues and future service headaches. Ultimately, pick an assembly that meets the vehicle's mounting and sensor interfaces and offers proven sealing and bearing tolerance. That approach minimizes downtime and helps ensure consistent, safe operation over the long term.
Explore More:
- Check out all Acura TLX parts & accessories
- Explore Wheels & Tires
- Browse all Auto Parts
