Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you want a more balanced stance and modestly better ground clearance without major suspension surgery, a Mitsubishi Outlander leveling kit can be an effective option. Choosing the right kit matters because fit, ride quality, and installation complexity all affect daily driving and long-term durability. This guide covers six shortlisted options that represent the most practical approaches to raising the front of your Outlander while retaining predictable handling. We evaluated durability, installation effort, and how each option alters ride and clearance. Read on to compare features and decide which approach suits your needs.
Looking for other parts? See all Mitsubishi Outlander parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | ReadyLIFT 1.5" Front Leveling Kit (66-33150) |  |
| Best Quality Built to a higher standard if you want something more solid | DEALPAREX 2-inch Leveling Lift Kit for Mitsubishi Outlander / Outlander Sport |  |
| Best Budget The cheapest option that still gets the job done reliably | TENKIDOM 25mm Front Leveling Kit for Mitsubishi Triton L200 (2005–2014) |  |
| Most Sold A high-volume bestseller chosen again and again | DEALPARTS 1.8" Leveling Lift Kit with Polyurethane Spacers for Mitsubishi Pajero/Montero |  |
| Best Value for Money The sweet spot between price and what you get | DEALPAREX Rear 1.6" (40mm) Polyurethane Coil Spacers for Mitsubishi Delica D:5 / Outlander |  |
| Best Overall The best all-around choice for most situations | MotoFab Lifts 2.5 in Front Leveling Lift Kit |  |
1. ReadyLIFT 1.5" Front Leveling Kit (66-33150)
| Maximum Lifting Height | 1.5 Inches |
|---|---|
| Material | 6061-T6 Billet Aluminum |
| Automotive Fit Type | Vehicle Specific Fit |
| Included Components | 1.5'' Front Leveling Kit |
This ReadyLIFT 1.5" front leveling kit is a vehicle-specific bolt-on spacer system that lifts the front to restore a level stance and accommodate larger tires. It installs without cutting or modifying struts and is CNC machined from 6061-T6 billet aluminum, which keeps the components light and corrosion resistant. In use it provides a modest, controlled lift that maintains factory geometry and allows up to 265/65-17 tire sizing without rubbing. The kit aligns to factory specifications after installation so normal suspension travel and handling are preserved. Installation is straightforward for a competent DIYer or shop and does not require suspension disassembly beyond standard procedures. Important limitations are that this is a front-only leveling solution and its listed tire fitment and performance were specified for other truck models, so fitment and exact lift on a Mitsubishi Outlander will require verification for that vehicle and may differ from the original application. If you need a larger lift or a full suspension overhaul this kit is not intended for that use.
Best for: A reliability-focused buyer who prioritizes preserving factory geometry and wants a conservative, factory-quality front lift to improve stance while minimizing long-term maintenance concerns.
Less Ideal for: Drivers seeking a larger or full suspension lift for off-road use or those who need guaranteed fitment for the Mitsubishi Outlander without additional verification should consider purpose-built Outlander kits or professional advice instead.
- Direct bolt-on design avoids cutting or permanent suspension modification
- CNC machined 6061-T6 billet aluminum construction for durability and corrosion resistance
- Maintains factory alignment and suspension travel after installation
- Allows larger tire sizing without rubbing when used within specified limits
- Front-only kit does not address rear ride height or full suspension balance
- Tire fitment and lift figures are specified for other vehicles and may not directly apply to the Mitsubishi Outlander
Verdict A precision-machined, bolt-on front leveling spacer that preserves factory geometry but is a front-only, modest lift solution requiring fitment confirmation for the Mitsubishi Outlander.
2. DEALPAREX 2-inch Leveling Lift Kit for Mitsubishi Outlander / Outlander Sport
| Maximum Lifting Height | 2 Inches |
|---|---|
| Material | High Carbon Steel |
| Auto Part Position | Front, Rear |
| Included Components | fitting kit |
| Automotive Fit Type | Vehicle Specific Fit |
This DEALPAREX 2-inch leveling lift kit raises the front and rear of compatible Mitsubishi Outlander and Outlander Sport models by up to 2 inches using high carbon steel coil spring spacers and a supplied fitting kit. It is installed between the coil springs and strut assembly to increase ground clearance, reduce bottoming on rough roads, and create room for larger wheels and tires. The kit includes front and rear spacers plus hardware for a vehicle-specific fit, and the manufacturer highlights easy installation and durable high-strength carbon steel construction for longer service life. In real-world use the kit is best for mild lift needs and addressing clearance for light off-road use or a more aggressive stance without changing ride geometry significantly. Expect modest changes to ride height and handling; because this is a spacer kit rather than a full suspension replacement it will not replicate the damping or alignment benefits of upgraded shocks or springs and professional alignment after installation is recommended.
Best for: Performance-minded owners who want a simple, factory-friendly way to gain a modest lift and fit larger wheels while retaining the car’s basic handling characteristics.
Less Ideal for: Drivers seeking major suspension performance upgrades, large off-road lifts, or improved damping should consider full spring and shock replacements instead of a spacer-only kit.
- Vehicle-specific fitment for Mitsubishi Outlander and Outlander Sport ensures bolt-in installation for listed years
- High-strength carbon steel spacers designed for durability and longevity
- Includes front and rear spacers plus a fitting kit so no separate hardware purchase is needed
- Provides only a modest 2-inch lift and does not replace springs or shocks so suspension tuning and damping remain unchanged
- May require professional alignment and inspection after installation to restore proper handling and tire wear
Verdict A durable, vehicle-specific 2-inch spacer kit that delivers modest ground clearance and wheel clearance without a full suspension overhaul.
3. TENKIDOM 25mm Front Leveling Kit for Mitsubishi Triton L200 (2005–2014)
| Fitment | Mitsubishi Triton L200 2005-2014 |
|---|---|
| Front lift | 25MM |
| Material | Aluminum alloy 6061-T6 |
| Package contents | 2 x Front Leveling Kits |
| Position | Front |
This TENKIDOM 25mm front leveling kit raises the front of a Mitsubishi Triton L200 (2005–2014) to correct rake and improve ground clearance without replacing springs or shocks. CNC-machined from 6061-T6 aluminum, the pair of spacers fit over the factory strut top and are intended to be a simple bolt-on solution installed at the front suspension. For everyday drivers the kit can modestly improve stance, reduce tire rub when running larger tires, and give slightly better approach angles for light off-road use or towing. The aluminum construction keeps weight low and resists corrosion compared with stamped steel alternatives. Important limitations are that the kit only lifts the front by 25mm and does not address rear ride height or changes in spring rates, so handling and ride comfort can change compared with stock. Installation may require basic suspension disassembly and alignment afterward, and this product is specifically made for the Triton L200 2005–2014 fitment so it is not a universal solution.
Best for: Budget-conscious Triton L200 owners who want an inexpensive, no-frills way to level the front for improved clearance and a more balanced look while keeping installation time and cost low.
Less Ideal for: Owners seeking a full-height lift, changes to rear ride height, or improved ride quality under heavy loads should consider a more complete suspension solution rather than front spacers alone.
- Factory-matching bolt-on design for a straightforward front lift on the specified Triton L200 years
- CNC-machined from 6061-T6 aluminum for strength and corrosion resistance
- Simple 25mm lift provides improved clearance for slightly larger tires and better approach angle
- Includes both front spacers so no separate purchases are required
- Only lifts the front by a fixed 25mm and does not address rear height or suspension tuning
- Requires partial front suspension disassembly and an alignment after installation
Verdict A low-cost, OEM-style front spacer kit that tidies the stance and adds modest clearance for Triton L200 owners who want a simple upgrade.
4. DEALPARTS 1.8" Leveling Lift Kit with Polyurethane Spacers for Mitsubishi Pajero/Montero
| Material | Polyurethane (PU) |
|---|---|
| Maximum Lifting Height | 1.8 Inches |
| Auto Part Position | Front, Rear |
| Included Components | fitting kit |
| Automotive Fit Type | Vehicle Specific Fit |
This DEALPARTS leveling kit uses polyurethane strut and coil spacers to raise ride height roughly 1.8 inches, giving extra ground clearance and room for larger wheels and tires. It is installed as a spacer set for front struts and rear coils and ships with a fitting kit to simplify the bolt-on installation, so typical use is a straightforward height correction for light off-road use or to correct sag. The kit’s high-density polyurethane construction is marketed for longer service life than cheap plastics and resists compressing under load, which helps maintain the added clearance over time. Because it is a spacer-style kit there is no change to spring rates or damping, so ride comfort and handling remain close to factory behavior but suspension travel and bump characteristics can be affected. Fitment is vehicle-specific so correct model match is required. This kit is a simple, low-complexity way to gain clearance, but it does not replace full suspension upgrades for heavy off-road use or load carrying.
Best for: A risk-averse mainstream buyer who wants a conservative, reversible way to add modest ground clearance and fit slightly larger wheels while keeping factory ride and handling characteristics.
Less Ideal for: Drivers planning extensive off-road use, heavy towing, or those wanting substantial suspension performance improvements should choose a full suspension upgrade instead.
- Vehicle-specific fit for compatible Mitsubishi Pajero/Montero models simplifies installation
- High-density polyurethane spacers resist compression for longer-lasting lift
- Includes strut spacers, coil spacers and a fitting kit for a bolt-on installation
- Adds about 1.8 inches of clearance to allow larger wheels and improved approach clearance
- Spacer-style lift does not alter spring rate or damping and may change suspension travel characteristics
- Not intended as a full suspension solution for heavy-duty off-road or increased payload
Verdict A straightforward, vehicle-specific spacer kit that provides about 1.8 inches of lift for modest clearance gains without changing factory suspension components.
5. DEALPAREX Rear 1.6" (40mm) Polyurethane Coil Spacers for Mitsubishi Delica D:5 / Outlander
| Fitment | Mitsubishi Delica D:5 (2006-present), Outlander (2006-2012) |
|---|---|
| Position | Rear |
| Material | Polyurethane (PU) |
| Included components | 2 coil spacers |
These rear coil spacers from DEALPAREX are a simple, bolt-on way to lift the rear of compatible Mitsubishi Delica D:5 and Outlander models by about 1.6 inches (40 mm). Made from high-density polyurethane, the pair installs between the rear coil springs and top mounts to increase ride height for extra ground clearance, improve stance, and create clearance for larger wheels and tires. Installation is straightforward for a competent DIYer or a shop and the kit is intended for vehicles with separate rear coils and shocks; the listing also recommends pairing with shock extenders when needed. The material resists compression better than lower-grade foam and is marketed for long service life. Limitations are that this is a modest rear-only lift intended for light off-road or clearance use rather than heavy-duty suspension work, and it does not replace shocks or address front ride height, alignment, or handling changes that can come with a rear lift. Buyers should plan for alignment and possible additional components for a balanced setup.
Best for: Practical optimizers who want an affordable, no-frills way to raise rear ground clearance and fit larger wheels with minimal modification and shop time.
Less Ideal for: Drivers seeking a full suspension overhaul, significant lift for heavy off-road use, or a factory-quality integrated lift solution should consider comprehensive kits or professional suspension upgrades.
- Vehicle-specific fit for Mitsubishi Delica D:5 and Outlander models for a cleaner installation
- High-density polyurethane construction designed for durability and resistance to compression
- Simple installation as a spacer-only kit for a quick rear lift without replacing major suspension components
- Rear-only lift of about 1.6 inches so front-to-rear ride height will be uneven without complementary front adjustments or components
- Not a shock replacement so may require shock extenders or alignment to maintain proper ride and handling
Verdict A budget-friendly, rear-only 1.6 inch lift using durable polyurethane spacers that works well for modest clearance and wheel-fitment upgrades on supported Mitsubishis.
6. MotoFab Lifts 2.5 in Front Leveling Lift Kit
| Auto Part Position | Front |
|---|---|
| Material | Aluminum |
| Maximum Lifting Height | 2.5 Inches |
| Automotive Fit Type | Vehicle Specific Fit |
This MotoFab 2.5-inch front leveling kit raises the vehicle front by a stated 2.5 inches using CNC-machined billet aluminum spacers finished in black powder coat. It installs as a bolt-on spacer that fits between the strut and strut tower, so you do not need to disassemble the strut or coil for most installations. Typical use is to correct a nose-down stance and create clearance for larger tires while preserving stock suspension geometry. Notable features include factory-style fitment, corrosion-resistant aluminum construction, and a relatively quick install time that most mechanically comfortable buyers can complete in a weekend with basic tools and a helper. Practical benefits are improved ground clearance and a level stance without swapping springs or shocks, and strong customer feedback on fit and finish. Important limitations are that alignment is required after installation, some users report needing new sway bar links or minor trimming in tight wheel/tire fits, and the kit is vehicle-specific so fit must be confirmed before buying for a Mitsubishi Outlander.
Best for: Balanced all-round buyers who want a reliable, factory-style leveling solution to improve stance and tire clearance without replacing major suspension components.
Less Ideal for: Drivers seeking adjustable ride-height, full suspension lift systems, or a plug-and-play kit guaranteed for all aftermarket tire sizes should consider dedicated lift kits or professional installers instead.
- CNC-machined billet aluminum construction for consistent fit and durability
- Powder-coated finish that resists corrosion and matches factory components
- Bolt-on design that avoids strut disassembly and shortens install time
- Provides a true 2.5-inch lift to allow larger tires and a level stance
- May require replacement sway bar links or minor trimming for some wheel/tire combinations
- Requires wheel alignment after installation to restore steering geometry
Verdict A simple, durable 2.5-inch front leveling spacer that gives a factory-style lift and quick bolt-on install for buyers wanting a balanced, long-lasting solution.
Choosing the Right Mitsubishi Outlander Leveling Kit: Key Factors to Consider
Fitment and Vehicle Compatibility
Correct fitment is the most important factor because components that do not match the Outlander s front suspension can lead to alignment problems, premature wear, and safety risks. Verify the kit is specified for the exact model year and trim to avoid differences in suspension design or electronic systems.
Compatibility affects which additional parts you may need, such as extended bolts or alignment shims. A kit that lists clear vehicle compatibility reduces the chance of returns and ensures the lift height is achieved without altering steering or subframe mounts.
Type of Leveling System
Leveling kits come as spacers, tapered strut caps, or lift-specific strut assemblies, and each type affects handling differently. Spacers compress less of the spring and tend to be lighter and simpler to install, while full strut assemblies replace dampers and springs for a more integrated lift.
Choosing the right type depends on how much lift you need and how you use the vehicle. For small height gains, spacers often maintain the original ride feel. For larger raises or when restoring proper damping, replacing struts or springs can provide a more controlled result.
Ride Quality and Handling
A leveling kit changes suspension geometry and spring rates, which in turn affects ride comfort and cornering behavior. Some kits preserve the factory spring and damper settings, keeping the original ride character, while others alter spring preload or require different dampers.
Consider how you drive daily: if you prioritize comfort and predictable handling, choose a solution that minimizes changes to spring rate and damping. If you carry heavier loads or want more aggressive stance, expect some tradeoffs in ride softness or steering feel.
Installation Complexity and Tools Needed
Installation ranges from a straightforward bolt-on spacer replacement to a multi-hour job requiring spring compressors and alignment. Kits that include all required hardware and clear instructions reduce errors and installation time.
If you plan to DIY, account for needed tools, safe procedures for working with springs and struts, and the potential need for an alignment afterward. Professional installation may be preferable for more complex kits to ensure suspension safety and proper geometry.
Durability and Corrosion Resistance
Because front suspension components are exposed to road debris and weather, material quality and coatings matter. Hardened fasteners, anodized or powder-coated spacers, and corrosion-resistant plate interfaces increase longevity and reduce maintenance needs.
Assess whether replacement bushings or hardware are available and how the kit handles salt and moisture. Robust construction reduces the risk of noise, loosening, or premature failure under routine driving conditions.
Alignment and Tire Compatibility
Raising the front changes camber and toe settings and may affect recommended wheel and tire sizes. Some kits necessitate a full alignment to restore safe steering and even tire wear, while others are designed to keep geometry within factory tolerances.
Confirm whether the kit supports the tire diameter you want and whether additional components, such as adjustable control arms or extended sway bar links, are required. Planning for alignment costs and tire fitment avoids handling issues after installation.
FAQ
Will a leveling kit change my Outlander s ride comfort?
A leveling kit can affect ride comfort depending on the type and amount of lift. Small spacer-type kits usually leave the springs and dampers unchanged and preserve much of the original ride. Larger lifts or kits that alter spring preload may feel stiffer or change damping behavior, so choose based on whether you value comfort or increased clearance.
Do I need an alignment after installing a leveling kit?
You will often need an alignment after installation because even small changes in ride height can alter camber and toe settings. Getting a professional alignment helps prevent uneven tire wear and ensures predictable steering and handling following the installation.
Can I install a leveling kit myself?
Many spacer-style leveling kits are designed for home installation with basic tools, but some require spring compressors or specialist tools. If the kit involves disassembling struts or changing springs, professional installation is recommended for safety and correct assembly.
How much lift is safe for everyday driving?
Moderate lifts that keep suspension travel and steering geometry within factory limits are generally safest for daily driving. Small increases, typically one to two inches, provide added clearance without major changes to handling. Larger lifts increase the risk of altered alignment and component stress.
Will a leveling kit affect towing or payload capacity?
A modest leveling kit usually has minimal impact on manufacturer-rated towing and payload, but changing suspension geometry and spring preload can shift load distribution. If you regularly tow or carry heavy loads, consider how the kit alters ride height and consult the vehicle s specifications or a suspension professional.
Are there maintenance considerations after installing a kit?
After installation, periodically check fasteners for tightness and inspect components for corrosion or wear. Larger tires or altered alignment can accelerate tire wear, so monitor tread and have alignments checked at regular service intervals. Timely attention keeps the suspension performing reliably.
How We Chose the Best Mitsubishi Outlander Leveling Kit
We started by focusing on kits designed specifically to work with the Outlander s front suspension geometry and ride height. Primary filters included fitment accuracy for the model, the type of lift components used, and whether the kit preserved factory suspension travel. We prioritized build quality, using materials and fasteners suited to road and light off-road use, and considered how the kit affected alignment parameters and tire compatibility. Ease of installation and the availability of clear instructions were key, since many owners install these kits themselves. Ride quality under daily driving and load, plus corrosion resistance for long-term durability, rounded out the evaluation. We excluded any kit that required extensive chassis modification, complex fabrication, or altered steering geometry beyond standard alignment correction. The final list emphasizes straightforward, reversible solutions that balance clearance, comfort, and reliability.
Our full evaluation process is outlined in our review methodology.
Conclusion
Choosing the right Mitsubishi Outlander leveling kit is about balancing clearance and ride quality while keeping safety in mind. Prioritize correct fitment, the type of leveling system, and how the change will affect alignment and daily handling. Remember that installation complexity and material durability influence long-term ownership. If you want a subtle stance upgrade with minimal tradeoffs, favor conservative lifts and ensure a post-installation alignment to maintain predictable performance.
Explore More:
- Check out all Mitsubishi Outlander parts & accessories
- Explore Suspension & Steering
- Browse all Accessories
