Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you drive a Mitsubishi Outlander, choosing the right brake calipers matters for safety and long-term reliability. Proper calipers ensure even pad wear, consistent pedal feel, and predictable stopping distances in everyday driving and heavier loads. This guide highlights a short list of the top brake calipers selected for the Outlander. We assessed each option against common buyer priorities like fitment accuracy and corrosion protection, along with build quality and ease of installation. Read on for what mattered in our selection and what to check before you buy.
Looking for other parts? See all Mitsubishi Outlander parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | FZJDSD Rear Right Electric Brake Caliper for Mitsubishi Outlander |  |
| Most Popular A crowd favorite that many people choose with confidence | Detroit Axle Rear Brake Caliper Pair with Brackets |  |
| Best Quality Built to a higher standard if you want something more solid | A-Premium Rear Disc Brake Caliper Assembly with Bracket for Mitsubishi Outlander/Outlander Sport |  |
| Best Budget The cheapest option that still gets the job done reliably | SCITOO Rear Left Brake Caliper (18B5105) |  |
| Most Sold A high-volume bestseller chosen again and again | M MATI Front and Rear Brake Caliper Kit with Rotors for Can-Am Outlander/Renegade |  |
| Best Value for Money The sweet spot between price and what you get | A-Premium Front Left Brake Caliper Assembly with Bracket for Mitsubishi Outlander |  |
| Best Overall The best all-around choice for most situations | TRQ Rear Brake Caliper Set (Direct Fit) |  |
1. FZJDSD Rear Right Electric Brake Caliper for Mitsubishi Outlander
| Fitment | Mitsubishi Outlander 2017-2022 (listed models) |
|---|---|
| Position | Rear right passenger side |
| Part numbers | 4605C044, 4605B566, 4605B638, 4605B800 |
| Package contents | 1 PC Rear Right Electrical Brake Cylinder Caliper |
This FZJDSD rear right electric brake caliper is a direct-replacement unit intended for Mitsubishi Outlander (and compatible Outlander PHEV/Eclipse Cross) models from the years the listing specifies. It replaces the factory passenger-side rear caliper and is used when the original unit is seized, leaking, or otherwise beyond repair. The caliper arrives ready for installation and is suitable for a professional installation or a competent DIYer with basic brake experience. Notable features include electrical parking brake compatibility and part-number cross-references to common Mitsubishi caliper numbers, which helps ensure fitment. In practice it restores normal braking and parking-brake function and offers a cost-effective alternative to dealer parts. Limitations are typical of aftermarket calipers: long-term durability can vary versus factory parts and you may need a scan tool or pin retraction tool to set the electronic parking brake during installation. Expect to follow standard brake bleeding and torque procedures and verify electrical connections for the parking-brake actuator.
Best for: Reliability-focused buyers who prioritize restoring proper braking and parking-brake function without paying dealer prices and who prefer practical, cost-conscious repairs.
Less Ideal for: Buyers seeking an exact factory-authorized part with guaranteed OEM-backed warranty or those unwilling to perform or pay for a professional brake bleed and electronic parking-brake reset.
- Made as a direct-replacement for the rear right electric caliper so it restores braking and electronic parking-brake function
- Includes multiple manufacturer part-number cross-references to simplify fitment verification
- Economical alternative to dealer-sourced calipers for repairs
- Suitable for professional installation or DIY fitting by experienced owners
- Aftermarket longevity can differ from factory-quality parts so long-term life is not guaranteed
- May require a parking-brake retraction tool or vehicle scan tool to complete installation and reset systems
Verdict A budget-friendly, direct-replacement rear right electric caliper that restores braking and electronic parking-brake function for specified Mitsubishi Outlander models but may require brake-system tools and professional procedures for installation.
2. Detroit Axle Rear Brake Caliper Pair with Brackets
| Position | Rear Left and Right |
|---|---|
| Piston Size | 1.37 inch (34.80 mm) |
| Piston Material | Steel |
| Brake Caliper Bracket Included | Yes |
This Detroit Axle kit supplies both left and right rear brake calipers with mounting brackets, intended as direct replacements to restore braking function. It is typically used when rear calipers are sticking, leaking, or worn and you want a like-for-like swap without modifying the brake system. Notable details include a single 1.37 inch steel piston per caliper and included brackets so the assembly installs as a unit. Practical benefits include ready-to-install fitment that reduces assembly work, fatigue and impact testing for durability, and a long 10-year warranty that offers reassurance for long-term ownership. Some owners report slight differences in bleeder screw sizes between sides and a need to supply their own high-temperature grease during installation, so you should have basic brake tools and bleeding supplies on hand. For an Outlander needing rear caliper replacement, this kit gives a convenient, affordable route back to factory-quality braking but expect to confirm exact fitment for your model year before installation.
Best for: Convenience-driven buyers who prioritize a ready-to-install, factory-replacement approach to repairs and want a straightforward solution to get their Outlander back on the road quickly.
Less Ideal for: Drivers seeking a performance upgrade or specialty calipers for racing should look elsewhere, and those who prefer to inspect parts in person before purchasing may prefer local parts suppliers.
- Includes both left and right rear calipers plus mounting brackets for easier installation
- Steel 1.37 inch pistons built to withstand impact and fatigue for durable braking action
- Designed as a direct-fit replacement to reduce modification and installation time
- Backed by a long 10-year warranty for extended ownership confidence
- May require adding high-temperature grease and standard bleeding tools not included
- Reported variation in bleeder screw fittings between sides that can surprise during installation
Verdict A convenient, budget-friendly pair of rear replacement calipers that restore factory-style braking for the Outlander with minimal fuss.
3. A-Premium Rear Disc Brake Caliper Assembly with Bracket for Mitsubishi Outlander/Outlander Sport
| Vehicle fitment | Mitsubishi Outlander 2014-2018 2.4L; Outlander Sport 2013-2018 |
|---|---|
| Position | Rear left and right |
| Piston count | 1 |
| Includes | Caliper, bracket, metal piston, installation hardware |
This A-Premium rear brake caliper assembly replaces the factory rear calipers on compatible Mitsubishi Outlander and Outlander Sport 2.4L models. It ships as a complete assembly with bracket, metal piston, and installation hardware so a technician can swap both driver and passenger side units without sourcing extra components. The caliper has a single piston design and an anti-rust coating intended to extend service life under road exposure. Typical use is direct replacement for worn or seized rear calipers during routine brake maintenance or rotor replacement. Practical benefits include a direct-fit approach that several buyers reported matched factory geometry and bled normally, and the included hardware simplifies installation. Limitations to consider are the single-piston configuration, which is standard for many rear applications but not a performance upgrade over multi-piston calipers, and the product is offered as a direct replacement rather than a high-end performance unit tuned for track use.
Best for: Performance-oriented buyers who prioritize reliable, factory-style replacements that restore braking feel and function for their Mitsubishi Outlander during routine maintenance or light spirited driving.
Less Ideal for: Drivers looking for track-capable, multi-piston performance calipers or heavy-duty upgrades should consider purpose-built performance calipers instead.
- Complete assembly with bracket and installation hardware for easier installation
- Anti-rust coating to help resist corrosion and extend service life
- Direct-fit design reported to match factory mounting and bleed normally
- Single-piston design is not a performance upgrade for high-heat or track-focused braking
- Not marketed as a heavy-duty or racing caliper so limited if you need upgraded stopping power
Verdict A practical, factory-style rear caliper assembly that restores reliable braking for specific Mitsubishi Outlander models but is not a multi-piston performance upgrade.
4. SCITOO Rear Left Brake Caliper (18B5105)
| Position | Rear Left |
|---|---|
| OEM Part Number | 18B5105 |
| Model | calipers without pads |
| Manufacturer | SCITOO |
This SCITOO rear left brake caliper is a cost-focused replacement intended for use on compatible Mitsubishi Outlander model years listed by the manufacturer. It uses a two-piece bolted design aimed at increasing stiffness and is offered without brake pads so you can reuse existing pads or pair it with a pad set. Installation is described as straightforward and made to factory-spec fitment to save time during a brake job. Practical benefits include lower cost compared with dealer parts, generally good fit reports from buyers, and claimed improvements in stopping power and noise reduction. Limitations to expect are variability in fit across model years—some buyers reported clearance or fit issues—so careful part-number and vehicle verification is important, and this caliper does not include pads or hardware, which adds steps and potential extra cost during installation. For a budget repair where you are prepared to confirm compatibility and install or supply pads, this caliper provides an affordable factory-replacement style option.
Best for: Budget-conscious Mitsubishi Outlander owners looking to restore braking function at a low cost and who are comfortable verifying fitment and handling installation or pairing the caliper with separate pads.
Less Ideal for: Drivers who want a complete, plug-and-play caliper kit with pads and hardware or those who prefer premium brand assurance and extended guarantees.
- Manufactured to match factory-style fit for listed Mitsubishi Outlander applications
- Two-piece bolted design for added caliper stiffness
- Lower cost alternative to dealer or premium aftermarket calipers
- Simple installation intended to minimize shop time when fitment is correct
- Sold without brake pads or mounting hardware
- Fit can vary between model years so verification is required before purchase
Verdict A wallet-friendly factory-style rear left caliper for Mitsubishi Outlander repairs if you confirm fitment and are prepared to add pads and hardware separately.
5. M MATI Front and Rear Brake Caliper Kit with Rotors for Can-Am Outlander/Renegade
| Manufacturer | M MATI |
|---|---|
| Manufacturer Part Number | 705600862 705600861 705600859 705600999 |
| Package contents | 3 rotors, front left caliper, front right caliper, rear caliper |
| Fitment range | Can-Am Outlander/Renegade models listed 2012-2022 |
This M MATI kit supplies front left, front right and a rear brake caliper plus three stainless-steel rotors as a bundled replacement set. It is sold as a direct-install assembly with brake pads pre-installed, banjo fittings and the mounting bracket included so installation is intended to need minimal adjustment. The rotors are described as SUS 420 stainless steel heat-treated to resist warping and extend service life. For a buyer replacing worn or damaged braking components, the package simplifies sourcing by including matched calipers and rotors in one box. Reported benefits from owners include fitment accuracy and value for money, but there are a few failures recorded such as fluid leakage from pistons on some units which suggests quality control variability. This kit is practical for a complete axle-level refresh but buyers should inspect each caliper on delivery and be prepared to address a warranty or return if a unit is defective.
Best for: Risk-averse mainstream buyers who prioritize getting a full, matched brake assembly in one purchase and prefer straightforward, low-hassle installation and replacement.
Less Ideal for: Shoppers who need parts for vehicles other than the listed Can-Am models or those who want OEM factory-sourced calipers and rotors should look elsewhere.
- Complete kit includes three calipers and three rotors for coordinated replacement
- Calipers come with pads, banjo fittings and mounting brackets for direct installation
- Rotors are stainless steel and heat-treated to reduce warpage and extend service life
- Fits the specified vehicle model years without need for modification
- Some customers reported piston leaks indicating occasional quality-control failures
- Kit fitment is limited to the listed Can-Am models and will not fit other vehicles such as Mitsubishi Outlander
Verdict A convenient, value-oriented full caliper-and-rotor replacement kit for the listed Can-Am models, but inspect for defects on arrival due to occasional quality issues.
6. A-Premium Front Left Brake Caliper Assembly with Bracket for Mitsubishi Outlander
| Compatible Models | Outlander 2005-2006, Outlander PHEV 2018-2020, Lancer 2009-2015 |
|---|---|
| Position | Front Left Driver Side |
| Includes | Caliper assembly with bracket, steel piston, installation hardware |
| Manufacturer Part Number | APBC2605 |
| Reference Numbers | 18-B4670B, MR370775 |
This A-Premium front left brake caliper assembly replaces the factory unit on compatible Mitsubishi Outlander and Lancer models and arrives as a complete assembly with bracket, steel piston, and installation hardware. It is intended for a direct swap during routine brake repairs or when a sticking or leaking caliper needs replacement. The assembled unit simplifies installation compared with a bare caliper because the bracket and hardware are included, which reduces bench time and the chance of missing small parts. As a value option it offers practical coverage for a year and targets straightforward mechanical repairs rather than performance upgrades. Limitations to note are that fitment is specific to certain Outlander years and engine options so you must confirm vehicle submodel compatibility before ordering, and this is a basic replacement rather than an upgraded performance caliper so expect OEM-like feel rather than sport tuning benefits.
Best for: Practical optimizers who want a budget-conscious, hassle-minimizing factory-style replacement for an Outlander without paying for premium performance parts; ideal for drivers prioritizing reliable, straightforward repairs.
Less Ideal for: Drivers seeking upgraded braking performance, track use, or broader multi-vehicle flexibility should consider higher-spec or universal-performance calipers instead.
- Complete assembly includes caliper, bracket, steel piston and installation hardware for easier installation
- Made to fit specified Mitsubishi Outlander and Lancer fitments for a direct factory-quality replacement
- One-year unlimited-mileage guarantee provides short-term peace of mind
- Fitment is limited to specific model years and submodels and requires verification before purchase
- Not a performance-oriented or upgraded caliper so braking characteristics mirror standard factory behavior
Verdict A cost-conscious, ready-to-install front left caliper for compatible Mitsubishi Outlander owners who want a practical, factory-style replacement.
7. TRQ Rear Brake Caliper Set (Direct Fit)
| Brand | TRQ |
|---|---|
| Model | TRQ CLA31957 2 Piece Brake Caliper Set |
| Coating | Zinc Coated |
| Seals | EPDM Seals |
| Includes | Hardware and Abutment Kit Included |
This TRQ rear caliper set replaces the factory rear calipers on compatible Mitsubishi Outlander models and is supplied as a complete, direct-fit pairing for driver and passenger sides. The calipers come zinc coated to resist rust and include EPDM seals, abutment hardware, and an installation kit so you can change both calipers and related hardware in a single job. TRQ ships the units pre-assembled which reduces bench work and makes them straightforward for a DIY brake job or a shop swap. The practical benefits are corrosion resistance for longer life in wet climates, factory-style fit that avoids bracket modifications, and included hardware so you do not need extra parts. Customers report easy installation and reliable stopping after replacement, though there are isolated reports of pistons feeling stiff and one case of brake drag that required additional troubleshooting. If you plan to replace rotors and pads at the same time, the kit simplifies the job; if you expect plug-and-play perfection every time, be prepared to check piston operation and wheel clearance during installation.
Best for: Balanced, practical owners who want a comprehensive, factory-style rear caliper replacement for Mitsubishi Outlander and value ease of installation and included hardware.
Less Ideal for: Drivers seeking performance-oriented or upgraded braking components should choose a performance caliper; those unwilling to perform a post-installation piston check or bleed should consider having a professional install and inspect the system.
- Zinc coating for improved corrosion resistance in salt or wet conditions
- Includes EPDM seals, abutment hardware, and installation kit for a complete rear caliper repair
- Pre-assembled direct-fit design reduces installation time and avoids modifications
- No core charge and 100% new components provide a full new replacement
- Some users reported stiff pistons or brake drag that required additional bleeding or adjustment
- Occasional fitment clearance issues reported on specific wheels requiring wheel weight relocation
Verdict A practical, corrosion-resistant direct-fit caliper pair for Mitsubishi Outlander that simplifies rear brake replacement but may require a quick piston and clearance check after installation.
Choosing the Right Mitsubishi Outlander Brake Calipers: Key Factors to Consider
Correct Fitment and Compatibility
Match calipers to the Outlander’s year, axle position, and factory rotor specifications. Correct fitment affects mounting bolt pattern, brake line inlet position, and pad shape.
If a caliper does not align with the vehicle’s brackets or bleeder screw orientation, installation becomes more complex and may require adapters. Ensuring compatibility avoids stress on hoses and prevents interference with suspension components. Always check the vehicle-specific application notes and verify whether the caliper is designated for the front or rear axle.
Piston Design and Seal Quality
Piston diameter, number of pistons, and seal materials influence pedal feel and resistance to piston sticking. Larger or multiple pistons can increase clamping force but must match rotor size and pad area to avoid uneven wear.
Seals made from high-quality elastomers resist swelling from brake fluid and maintain a positive seal over temperature cycles. Robust dust boots and protective features reduce contamination risk, which helps prevent leaks and sticking over time.
Corrosion Resistance and Coatings
Calipers are exposed to road salt, water, and debris, so coatings and base metal choice matter for longevity. Corrosion can seize sliding pins or degrade mounting surfaces, leading to uneven braking and costly repairs.
Look for durable electrocoatings, powder coats, or plating that cover both visible and hidden surfaces. Corrosion-resistant hardware and stainless-steel components for guide pins or bolts also help maintain serviceability and consistent brake performance.
Mounting Hardware and Serviceability
Included guide pins, bushings, bolts, and anti-rattle hardware save installation time and ensure correct alignment. Calipers that ship with compatible mounting hardware reduce the chance of mismatched parts during replacement.
Consider whether the caliper accepts standard replacement pads and whether bleeder screws are accessible for routine maintenance. Designs that facilitate pad replacement and piston retraction simplify future servicing and reduce shop time.
Rebuildability and Parts Availability
Access to rebuild kits, replacement pistons, and seals extends a caliper’s useful life and can be more economical than full replacement. For the Outlander, confirm that seals and pistons are available in common sizes and that aftermarket kits list vehicle compatibility.
Calipers that follow common industry dimensions or that have documented rebuild kits make repairs straightforward. If you expect to repair rather than replace, check distribution channels for parts and whether remanufactured options exist.
Brake Fluid Compatibility and Heat Management
Ensure caliper materials and seals are compatible with the brake fluid type used in the vehicle. High operating temperatures can affect seal life and fluid boiling point margins, so heat dissipation matters for heavy use.
Design features like piston placement and thermal mass influence how quickly a caliper sheds heat. For drivers who tow or frequently perform repeated hard stops, prioritize calipers with proven resistance to fade and seals rated for higher temperature ranges.
FAQ
How do I know if a caliper is for the front or rear of my Outlander?
Caliper listings typically specify axle position and the vehicle model years they fit. Front calipers usually accommodate larger pads and rotors and may have different mounting bracket locations. Verify the part’s application notes or fitment table for your Outlander’s model year and axle to avoid ordering the wrong side.
What are common symptoms that a brake caliper needs replacement?
Typical signs include uneven pad wear, a pulling sensation during braking, a soft or sinking pedal, or visible fluid leakage near the caliper. Another clue is elevated rotor temperatures or a persistently dragging wheel after driving. These symptoms often indicate sticking pistons, damaged seals, or seized guide pins.
Can I rebuild a caliper instead of replacing it?
Many calipers can be rebuilt using seal and piston kits when the housing is structurally sound. Rebuilds restore sealing surfaces and can be cost-effective, but they depend on parts availability and the condition of the bore. If the caliper body is pitted or cracked, full replacement is a safer choice.
How difficult is it to replace a brake caliper on an Outlander?
Difficulty varies with mechanical skill and access to tools. Basic caliper replacement usually requires removing the wheel, caliper mounting bolts, disconnecting the brake line, and bleeding the system afterward. Having the correct fittings and a clean workspace makes the job manageable for a competent DIYer, but some owners prefer professional installation to ensure correct bleeding and torque.
Are remanufactured calipers a good option?
Remanufactured calipers can offer a balance between cost and reliability when they are restored to original specifications and include new seals and hardware. Check that the remanufacturer follows clear quality controls and provides compatibility info for the Outlander. Warranty and corrosion protection are useful indicators of reman quality.
How We Chose the Best Mitsubishi Outlander Brake Calipers
We focused on factors that most directly affect performance, longevity, and serviceability for Mitsubishi Outlander brake calipers. Our evaluation prioritized precise vehicle-specific fitment, material and coating quality to resist corrosion in wet and salty climates, piston design and seal robustness to limit leaks, and mounting hardware compatibility to ease installation. We also considered whether calipers support common pad shapes and rotor sizes for the Outlander, and whether replacement parts and rebuild components are readily available. We excluded units that require extensive modification or do not list explicit compatibility with the Outlander. We also set aside calipers with unclear warranty terms or minimal corrosion protection. The result is a shortlist of options that meet practical expectations for fit, durability, and serviceability for this vehicle.
Our full evaluation process is outlined in our review methodology.
Conclusion
When selecting brake calipers for a Mitsubishi Outlander, prioritize correct fitment for the vehicle and axle position, durable seals and pistons, and corrosion-resistant finishes. Consider whether you want a unit that is easily rebuilt and whether mounting hardware is included to simplify installation. Balancing serviceability, heat tolerance, and parts availability will help you choose a caliper that meets your driving demands and maintenance preferences. Use the factors above to weigh tradeoffs between long-term reliability and ease of installation.
Explore More:
- Check out all Mitsubishi Outlander parts & accessories
- Explore Brake System
- Browse all Auto Parts
