Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you want fuller bass, clearer midrange, and a more enjoyable in-car listening experience, choosing the right door speakers for your Subaru Crosstrek matters. The factory units often limit dynamics and detail, so a targeted upgrade can noticeably improve clarity and low-end response without major dash changes. This guide covers seven shortlisted door speakers that suit the Crosstrek's door openings and electrical system considerations. We evaluated each option for sound quality and installation compatibility to help you pick the best fit for your setup. Read on to see the top choices and the criteria used to narrow them down.
Looking for other parts? See all Subaru Crosstrek parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | BOSS Audio Systems P65.4C Phantom Series 6.5" 4‑Way Car Door Speakers (pair) |  |
| Most Popular A crowd favorite that many people choose with confidence | Sound Storm Laboratories EX365 6.5" 3-Way Car Door Speaker (pair) |  |
| Best Quality Built to a higher standard if you want something more solid | BOSS Audio Systems CH6530B 6.5" 3-Way Coaxial Car Door Speakers (Pair) |  |
| Best Budget The cheapest option that still gets the job done reliably | Sound way CX-165 6.5" 2-Way Coaxial Car Door Speakers (Pair) |  |
| Most Sold A high-volume bestseller chosen again and again | Alphasonik AS265P 6.5" 3-Way Coaxial Car Speakers (2 Pairs) |  |
| Best Value for Money The sweet spot between price and what you get | Pyle PL410BK 4" x 10" 3-Way Triaxial Car Speakers (Pair) |  |
| Best Overall The best all-around choice for most situations | Kenwood 6.5" KFC Series 2-Way Car Door Coaxial Speaker (KFC-1666S) |  |
1. BOSS Audio Systems P65.4C Phantom Series 6.5" 4‑Way Car Door Speakers (pair)
| Speaker Size | 6.5 Inches |
|---|---|
| Speaker Type | Coaxial 4‑Way |
| Impedance | 4 Ohms |
| Max Power | 400W |
| Signal-to-Noise Ratio | 70 dB |
These BOSS P65.4C Phantom speakers are a budget 6.5" 4‑way coaxial set intended as a straightforward door upgrade for an aftermarket sound refresh. In use they replace factory door speakers to deliver clearer highs from the dual tweeters and improved midrange detail from the dedicated mid driver; users can also hook them to an amplifier for higher output. Construction uses a polypropylene cone with rubber surround and a cast aluminum basket for a stable mounting surface and predictable response in a vehicle door. Practical benefits include higher maximum power handling than many stock speakers, a fuller high end from the 0.75" tweeters, and compatibility with wired installations common in Crosstrek door locations. Limitations are modest factory radio sensitivity and midbass response—these speakers are not a substitute for a powered subwoofer and will perform best when driven by a head unit with decent output or a small amp. Professional installation is recommended to ensure secure mounting and avoid installation rattles in Subaru door panels.
Best for: A reliability‑focused buyer seeking an affordable, durable door speaker upgrade for regular driving who prioritizes consistent day‑to‑day performance over high‑end audiophile detail.
Less Ideal for: Drivers seeking deep, room‑shaking bass or an audiophile component system should look at adding a powered subwoofer or higher‑end component speakers instead.
- 4‑way coaxial design with separate mid and dual tweeters for clearer highs and midrange detail
- 400W maximum power rating supports connection to an amplifier for increased volume and headroom
- Polypropylene cone with rubber surround and cast aluminum basket for durable, vehicle‑grade mounting
- Sold as a matched pair for a consistent front stage
- System sensitivity is moderate so the speakers can sound underpowered on weak factory head units without an amp
- Not water resistant so they need proper door protection and mounting to avoid moisture exposure
- Limited low‑bass output compared with dedicated subwoofers
Verdict A sturdy, budget‑minded 6.5" 4‑way door speaker pair that reliably upgrades highs and mids for everyday Subaru Crosstrek use when paired with a capable head unit or small amp.
2. Sound Storm Laboratories EX365 6.5" 3-Way Car Door Speaker (pair)
| Speaker Size | 6.5 Inches |
|---|---|
| Speaker Type | Full Range 3-Way |
| Impedance | 4 Ohms |
| Sensitivity | 88 dB @ 1 W/1 m |
| Frequency Response | 85 Hz – 18 kHz |
The Sound Storm Laboratories EX365 are 6.5-inch 3-way coaxial speakers intended as a direct door replacement to upgrade factory sound without heavy modification. They mount like a standard 6.5 speaker and are typically used in front or rear doors to deliver clearer mids and brighter highs than many stock Crosstrek speakers. Notable features include a poly injection cone, rubber surround, mylar dome tweeter and a stamped basket, which together yield decent durability and improved transient response for everyday listening. With a sensitivity of 88 dB and a 4-ohm impedance these speakers play well from a factory head unit and handle modest external amplification if you add an amp later. Practical benefits are better vocal clarity and more pronounced treble compared with stock door speakers and an easy drop-in fit for common 6.5 openings. Limitations are modest low-end extension—these are not a bass-heavy solution—and some users report reliability issues over long term heavy use, so they are best for drivers seeking an inexpensive, convenience-focused upgrade rather than audiophile longevity.
Best for: Convenience-driven buyers who want an easy, low-cost way to replace factory door speakers in a Subaru Crosstrek and get clearer vocals and treble without installing an external amp.
Less Ideal for: Drivers seeking deep bass or a long-term high-power upgrade path should consider a separate woofer or higher-end component speakers instead.
- Direct 6.5" drop-in form factor for common door openings
- Poly injection cone and rubber surround for weather resistance and durability
- 3-way design (woofer, midrange, tweeter) improves clarity across frequencies
- Works acceptably from factory head units with no amp required
- Limited bass extension compared with larger woofers or subwoofers
- Some reviewers report longevity and intermittent connection issues over extended heavy use
Verdict A practical, inexpensive drop-in upgrade for Subaru Crosstrek door speakers that boosts clarity and treble but will not replace a dedicated bass system.
3. BOSS Audio Systems CH6530B 6.5" 3-Way Coaxial Car Door Speakers (Pair)
| Speaker Type | Coaxial 3-way |
|---|---|
| Speaker Size | 6.5 Inches |
| Impedance | 4 Ohms |
| Sensitivity | 90 dB @ 1W/1m |
| Frequency Response | 100 Hz to 15 kHz |
The BOSS CH6530B is a 6.5-inch, 3-way coaxial speaker pair intended for direct door replacement to improve clarity over stock units. It combines a poly injection woofer, a 1-inch polyimide midrange and a 0.5-inch piezo tweeter to extend highs and mids while the dynamic driver aims to keep midbass present. Typical use is replacing worn factory door speakers on models like the Subaru Crosstrek to gain clearer vocals and treble detail without adding an external amp. Notable features include a 4 ohm impedance that matches most factory head units, 90 dB sensitivity for decent output from a stock radio, and relatively shallow mounting depth for easier door fitment. Practical benefits are clearer midrange and highs and simple wired installation with common mounting sizes. Limitations are variable build quality reported by some users and modest low-frequency extension compared with component or powered speakers, so bass-heavy listeners may want a separate subwoofer or an amplifier for improved control and longevity.
Best for: Performance-oriented Crosstrek owners who want a clear, cost-effective upgrade to factory door speakers for improved vocals and instrument detail without installing an amp.
Less Ideal for: Audiophiles seeking deep, tight bass or owners who plan to drive speakers hard without an external amplifier should consider component speakers or adding an amp and subwoofer instead.
- Three-way coaxial design delivers clearer treble and midrange compared with typical factory door speakers.
- 90 dB sensitivity provides usable volume from a stock Crosstrek head unit without an amp.
- Shallow mounting depth and common 6.5-inch size simplify door replacement and installation.
- 4 ohm impedance matches standard factory wiring for plug-and-play compatibility.
- Bass response is limited compared with component speakers or powered systems.
- Some reports of inconsistent long-term reliability and occasional manufacturing faults.
- Included wiring or accessories may be basic and not ideal for high-power use.
Verdict A budget-friendly 6.5" 3-way upgrade that improves mids and highs for Crosstrek owners but offers limited bass and mixed long-term durability.
4. Sound way CX-165 6.5" 2-Way Coaxial Car Door Speakers (Pair)
| Speaker Type | Coaxial 2-way |
|---|---|
| Speaker Size | 6.5 Inches |
| Impedance | 4 Ohms |
| Sensitivity | 90 dB |
| Power (RMS) | 60 watts |
The Sound way CX-165 is a value-oriented 6.5-inch coaxial speaker pair intended to replace factory door speakers. Each speaker combines a polypropylene woofer with a 1-inch tweeter and a rubber surround to deliver clearer mids and stronger bass than many stock Crosstrek door units. With 60 watts RMS (120 watts peak) and 90 dB sensitivity they can play reasonably loud from a factory head unit, and spring-loaded terminals plus shallow 2.4-inch mounting depth simplify installation in many door locations. Practical benefits include audible improvement in bass presence and overall clarity for everyday listening without adding an amp, and included mounting screws make it a straightforward DIY swap. Limitations are audible: highs are not exceptionally detailed compared with higher-end alternatives, and several reviewers report clearance and fit issues with some vehicles requiring minor modification or grille reuse. Expect good bang for the buck if you want a simple, inexpensive upgrade, but audiophiles or those needing perfect fitment should consider more premium, vehicle-specific options.
Best for: Budget-conscious Crosstrek owners who want an affordable, straightforward door speaker upgrade to noticeably improve daily listening without adding an amplifier or complex installation.
Less Ideal for: Audiophiles seeking very precise highs or buyers who need guaranteed drop-in, vehicle-specific fitment should look at premium, Crosstrek-focused speaker kits or professional installation options.
- Clear improvement over many factory door speakers for vocals and bass thanks to a polypropylene woofer and rubber surround
- 90 dB sensitivity and 60 watts RMS make them playable from a stock head unit without an external amplifier
- Shallow 2.4-inch mounting depth and spring-loaded terminals ease installation in most door locations
- Includes mounting screws and comes as a ready pair for left and right doors
- Not as detailed in the high end as midrange or premium speakers
- Some vehicles may require trimming or modification because of back-profile width or grille fit
- Power ratings are peak-focused so sustained loud use may reveal distortion without better amplification
Verdict A cheap, easy-to-install door speaker pair that noticeably beats factory Crosstrek speakers for everyday listening but lacks high-end detail and perfect drop-in fitment.
5. Alphasonik AS265P 6.5" 3-Way Coaxial Car Speakers (2 Pairs)
| Speaker Size | 6.5 Inches |
|---|---|
| Impedance | 4 Ohms |
| Tweeter Diameter | 1 Inches |
| Number of Items | 4 |
| Speaker Type | Coaxial |
The Alphasonik AS265P kit supplies two pairs of 6.5-inch three-way coaxial speakers intended as a direct upgrade over factory door units. Each speaker combines a polypropylene woofer with a polyetherimide tweeter and a 1-inch tweeter to broaden the frequency range and keep vocals clear at typical listening volumes. The package includes grilles, mounting hardware and speaker leads to simplify installation into most factory locations. With 35 watts RMS per speaker and a 4-ohm impedance these speakers are best driven by a factory head unit or modest aftermarket deck; they offer louder, clearer midrange and highs compared with many stock Crosstrek door speakers and will benefit from a modest subwoofer if you want stronger low end. Expect easy, mostly bolt-in installation for Subaru Crosstrek front or rear doors that accept 6.5" replacements, but know these are budget-friendly, ferrite-magnet units so they will not match the tight bass or headroom of higher-end component speakers or powered amplifiers. They are a practical, low-risk way to noticeably improve daily listening without complex wiring or tuning.
Best for: Risk-averse mainstream buyers who want a straightforward, low-risk upgrade to their Subaru Crosstrek sound system that improves clarity and volume without changing the factory electrical setup.
Less Ideal for: Audiophiles seeking deep bass, maximum headroom, or competition-grade sound and users planning to drive these speakers with a high-power external amplifier without upgrading other system components.
- Includes two pairs with grilles and mounting hardware for straightforward replacement of factory door speakers
- Polypropylene cone and polyetherimide tweeter deliver clear midrange and crisp highs at typical driving volumes
- 4-ohm impedance and modest RMS rating work well with a factory Crosstrek head unit without needing an external amplifier
- Limited low-frequency output compared with dedicated component speakers or a system with an amplifier
- Ferrite magnets and budget construction limit power handling and long-term headroom at very high volumes
Verdict A budget-friendly, easy-to-install 6.5" speaker kit that reliably improves Crosstrek door sound for everyday listeners but will not replace a powered, high-end audio setup.
6. Pyle PL410BK 4" x 10" 3-Way Triaxial Car Speakers (Pair)
| Power Handling | 150 Watts RMS / 300 Watts Max |
|---|---|
| Impedance | 4 Ohms |
| Sensitivity | 91 dB |
| Mounting Depth | 2.52'' |
| Surround | Butyl rubber |
These Pyle PL410BK speakers are a budget-minded 4×10 three-way triaxial pair intended as direct replacements for factory door or side-panel speakers. They combine a 1-inch neodymium film midrange and 3/4-inch piezo tweeters with a rubber surround and a claimed 150W RMS power handling, so they produce stronger mids and clearer highs than many stock Crosstrek door speakers when driven by a factory or modest aftermarket head unit. Installation is straightforward thanks to the standard 4×10 footprint and included mounting hardware and grills. Expect louder, more articulate vocals and treble without adding a separate midrange or tweeter. Downsides are that bass output is limited by the small woofer and piezo tweeters do not match the smoothness of silk or polymer domes, so sound can be a bit forward or bright at higher volumes. Also the supplied wiring and components are basic, so upgrading wiring or using a simple crossovers or amp will improve performance. For the price they deliver a noticeable step up from factory speakers for Crosstrek owners who want an affordable, easy upgrade.
Best for: Practical optimizers who want a cost-effective, plug-and-play improvement to factory Crosstrek door sound without adding amps or external tweeters.
Less Ideal for: Audiophiles seeking deep bass or very smooth, refined highs should look at component systems or larger speakers with separate tweeters and a proper amplifier.
- Standard 4×10 mounting fits common door and side panel locations for easy replacement in Crosstrek doors.
- Three-way triaxial design (woofer, midrange, piezo tweeter) improves midrange clarity and treble detail over typical stock speakers.
- 150W RMS/300W peak rating provides headroom for louder listening without obvious distortion when paired with moderate power.
- Butyl rubber surround and high-temperature voice coil increase durability for automotive use.
- Includes speaker grills, basic cables, and mounting hardware for a quicker install.
- Small woofer size limits low-frequency extension and bass impact compared with dedicated woofers or larger speakers.
- Piezo tweeters can sound bright and less natural than higher-quality dome tweeters.
- Supplied wiring and accessories are basic and may bottleneck performance unless upgraded.
Verdict A very affordable, easy-to-install upgrade that tightens mids and highs in a Crosstrek door but will not deliver deep bass or audiophile-grade treble smoothness.
7. Kenwood 6.5" KFC Series 2-Way Car Door Coaxial Speaker (KFC-1666S)
| Speaker Size | 6.5 Inches |
|---|---|
| Impedance | 4 Ohms |
| Power Handling (RMS per pair) | 60 watts per pair |
| Frequency Response | 40 – 22000 Hz |
| Sensitivity | 90 dB |
The Kenwood KFC-1666S is a 6.5-inch two-way coaxial speaker intended as a direct-style replacement for factory door speakers on vehicles like the Subaru Crosstrek. It pairs a polypropylene woofer with a 1-inch balanced dome tweeter and a ferrite magnet motor structure to produce clear vocals and defined highs across a broad 40–22,000 Hz frequency range. With 4 ohm impedance and 60 watts RMS per pair, these speakers are driven easily by most factory head units without requiring an external amplifier. Installation is typically straightforward in Crosstrek doors that accept 6.5" replacements, and the shallow top-mount depth helps avoid interference with window mechanisms. Expect strong midrange clarity and good sensitivity for highway listening, but limited low-end punch compared with larger or component systems. Buyers should check the Crosstrek's mounting hole pattern and may need simple adapters or clips for a clean fit. For a balanced all-round upgrade that prioritizes everyday listening and ease of installation, these deliver solid value.
Best for: Balanced buyers who want a reliable, factory-style door speaker upgrade for everyday listening in a Subaru Crosstrek without adding amplifiers or complex installation.
Less Ideal for: Audiophiles who prioritize deep bass or users planning to build a high-power component system should consider larger woofers or a separate subwoofer instead.
- Clear midrange and defined highs from the 1" balanced dome tweeter
- Shallow top-mount depth makes installation easier in many door pockets
- 90 dB sensitivity and 4 ohm impedance work well with factory radios
- Polypropylene cone and treated surround resist common cabin moisture and wear
- Limited bass extension compared with larger speakers or dedicated subwoofers
- Mounting hole pattern may not align with every vehicle without adapters
- Discontinued status could make matching pairs or replacements harder over time
Verdict A practical, easy-to-install 6.5" coaxial that improves clarity and treble for Crosstrek door upgrades while leaving deep bass to a subwoofer.
Choosing the Right Subaru Crosstrek Door Speakers: Key Factors to Consider
Speaker Size and Mounting
Correct speaker size and mounting are fundamental because the speakers must align with the Crosstrek's factory openings and mounting points. If the speaker does not fit the door cavity, you may need adapters, spacers, or cutting that can affect speaker placement and soundstage.
Mounting depth and flange diameter also influence whether the speaker clears window mechanisms and inner door hardware. Choose speakers with documented compatibility or with a mounting profile that matches the vehicle to avoid binding, rattles, or compromised seal that can reduce bass output.
Power Handling and Sensitivity
Power handling indicates how much amplifier power a speaker can accept without damage, while sensitivity affects how loudly a speaker plays from a given power level. For Crosstrek owners using the factory head unit, moderate sensitivity and efficient speakers often produce better perceived volume and clarity than very low-sensitivity, high-power models.
If you plan to add an external amplifier, match the speaker's RMS power rating to the amp to avoid clipping or underpowering. Balancing sensitivity and power handling helps you achieve clean dynamics without stressing the vehicle wiring or the head unit.
Speaker Type: Component Vs Coaxial
Component door speakers separate the tweeter and woofer, allowing more flexibility in placing the tweeter for improved imaging, while coaxial speakers combine drivers into a single unit for simpler installation. The choice affects soundstage, treble clarity, and installation complexity.
Components often deliver superior separation and detail if you can mount the tweeters effectively in the Crosstrek's door or dash, but they may require more time and experience to wire and place. Coaxial options are usually more straightforward and can still offer a substantial upgrade without additional mounting modifications.
Frequency Response and Tonal Balance
A speaker's frequency response determines how it reproduces bass, mids, and highs, which directly impacts how instruments and vocals sound in your car. For a balanced system in the Crosstrek, look for speakers that extend low enough to improve bass without muddying the midrange, and that provide clear highs without harshness.
Tonal balance matters because door placement tends to emphasize midrange; choosing speakers with a controlled midband and accurate highs will produce a more natural sound and better vocal reproduction during everyday driving.
Build Quality and Weather Resistance
Door speakers are exposed to heat, cold, and occasional moisture, so materials and construction affect longevity. Look for corrosion-resistant terminals, treated cone materials, and robust surrounds that withstand temperature cycles and humidity inside the door cavity.
Better build quality also reduces the chance of rattles and mechanical failures that degrade sound over time. Prioritizing durability minimizes the need for repeated replacements or warranty claims.
Installation and Wiring Compatibility
Ease of installation influences total cost and time. Speakers that match the Crosstrek's wiring harnesses, use common terminal types, and include clear mounting hardware simplify the swap. If adapters or harnesses are needed, check for availability and whether they require splicing.
Also consider clearance for window mechanisms and whether the speaker's grille or basket will interfere with door panels. Minimizing modifications preserves factory functionality and reduces the risk of door rattle or fitment issues.
FAQ
Will aftermarket door speakers fit my Subaru Crosstrek without modifying the doors?
Many aftermarket door speakers are designed to match common vehicle openings and will fit without major door modification, but fit can vary by model and speaker. Check mounting depth, flange diameter, and any adapter requirements. If you are unsure, measure your door cavity or consult fitment guides to avoid cutting or altering the door panel.
Do I need an external amplifier to improve sound in a Crosstrek?
An external amplifier can provide cleaner power and more headroom, which often improves dynamics and bass control. However, a high-sensitivity speaker can still offer meaningful improvement when driven by the factory head unit. Whether to add an amp depends on how loud and detailed you want the system to be and whether you plan to power multiple upgraded speakers.
Are component speakers worth the extra installation effort?
Component speakers usually yield better imaging and clearer treble because the tweeter can be positioned independently, but they require more installation work and sometimes additional mounting hardware. If you prioritize soundstage and detail and are comfortable with a more involved install, components are often worthwhile; otherwise, coaxial speakers provide a simpler upgrade with good results.
How can I reduce door rattles after installing new speakers?
Rattles often come from poor sealing or loose panels. Use foam baffles, closed-cell tape, or sound-deadening material on the door skin to create a better seal and reduce vibration. Ensure mounting screws are snug and that speaker flanges sit flush against the door or adapter to minimize movement.
What maintenance do door speakers need over time?
Door speakers generally require little regular maintenance, but periodic checks for corrosion on terminals, loose mounting screws, and torn surrounds can prevent long-term issues. Keep window drains clear to reduce moisture exposure and inspect seals if you notice changes in sound or intermittent connections.
How We Chose the Best Subaru Crosstrek Door Speakers
We focused on speakers that fit Subaru Crosstrek door openings and work reliably with the vehicle electrical system. Key evaluation criteria included acoustic performance, measured by clarity, tonal balance, and bass extension; physical fit and mounting options specific to door cavities; sensitivity and power handling relative to typical Crosstrek head units and amplifiers; ease of installation, including wiring and grille fitment; and long-term durability against temperature and moisture common in door locations. We excluded speakers that require major door modification, custom enclosures, or changes to factory wiring harnesses that exceed basic installer skills. We also filtered out options lacking clear mechanical fit information or with inconsistent performance reports. The final list emphasizes products that balance sound improvement, straightforward installation, and robustness for everyday use in the Subaru Crosstrek.
Our full evaluation process is outlined in our review methodology.
Conclusion
When upgrading Subaru Crosstrek door speakers, prioritize fitment, sensitivity, and frequency balance to ensure reliable improvements without extensive door modifications. Decide whether you value easier installation and solid all-around performance from coaxial options or prefer component systems for enhanced imaging if you can accommodate tweeter placement. Balance power handling with your existing head unit or a planned amplifier upgrade, and give attention to build quality and installation practices to prevent rattles and premature wear. Following these priorities will help you pick a durable, better-sounding solution that matches your listening goals.
Explore More:
- Check out all Subaru Crosstrek parts & accessories
- Explore Electronics
- Browse all Accessories
