Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you own a Nissan Murano and suspect gasket wear or leakage, picking the right engine gasket set matters for reliability and long-term engine health. A correct gasket set helps restore proper sealing between engine components, reduces the risk of oil and coolant cross-contamination, and can prevent more serious engine damage down the line. This guide highlights seven shortlisted Nissan Murano engine gasket sets chosen for their fitment focus and material durability. We evaluated each option for sealing performance and compatibility so you can decide which set best matches your repair scope and confidence level. Read on for the factors we used and what to prioritize when replacing gaskets.
Looking for other parts? See all Nissan Murano parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | Fel-Pro MS96454 Intake Manifold Gasket Set for Nissan Murano |  |
| Most Popular A crowd favorite that many people choose with confidence | WOLLVON Valve Cover and Plenum Gasket Set for Nissan 3.5L V6 |  |
| Best Quality Built to a higher standard if you want something more solid | Fel-Pro HS 21157 PT-1 Engine Cylinder Head Gasket Set |  |
| Best Budget The cheapest option that still gets the job done reliably | Dtomi Engine Valve Cover and Upper Intake/Plenum Gasket Set for Nissan 3.5L |  |
| Most Sold A high-volume bestseller chosen again and again | Sorello Engine Valve Cover Gasket Set for 3.6L V6 |  |
| Best Value for Money The sweet spot between price and what you get | JDMSPEED Valve Cover Set with Gaskets and Spark Plug Tube Seals for VQ35DE 3.5L (Pair) |  |
| Best Overall The best all-around choice for most situations | MITZONE Valve Cover Set with Gaskets, Bolts, Oil Cap and PCV Valve for Nissan 3.5L VQ35DE |  |
1. Fel-Pro MS96454 Intake Manifold Gasket Set for Nissan Murano
| Brand | Fel-Pro |
|---|---|
| Model | MS96454 |
| Manufacturer Part Number | MS96454 |
| Application | Intake manifold gasket set |
The Fel-Pro MS96454 intake manifold gasket set replaces the seals between the intake manifold and cylinder heads on compatible Nissan Murano engines to restore proper air and coolant sealing. It is used when performing intake manifold removal or repairing coolant leaks that migrate between the manifold and heads. Notable features include PermaDryPlus molded rubber over an aluminized steel carrier, locating tabs for correct alignment, and torque limiters to reduce over-tightening and gasket damage during installation. In practice this delivers a reliable, engine-tested seal that copes with imperfect mating surfaces and typical heat cycling, reducing symptoms like rough idle, coolant loss, and potential oil contamination. Installation is straightforward for a competent mechanic because the set includes the necessary gaskets for the repair. Limitations are minimal for the intended application: this is a direct repair part rather than a performance upgrade, and correct installation and clean mating surfaces are still required for long-term reliability.
Best for: Buyers prioritizing reliability and a dependable factory-quality repair for their Nissan Murano who want a tested gasket set engineered for real-world sealing.
Less Ideal for: Drivers looking for performance gains, custom sealing solutions, or parts for vehicles other than the Nissan Murano should consider alternatives.
- PermaDryPlus molded rubber over aluminized steel carrier for durable, heat-resistant sealing
- Includes locating tabs and torque limiters to simplify correct installation and reduce gasket damage
- Engineered and vehicle-tested for repair environments to seal imperfect mating surfaces
- Complete gasket set includes all parts needed for intake manifold repair
- Not a performance part — intended only as a factory-style replacement
- Requires proper surface preparation and torque procedure for reliable long-term sealing
Verdict A vehicle-tested, factory-quality intake manifold gasket set for Nissan Murano owners who need a reliable repair part rather than a performance upgrade.
2. WOLLVON Valve Cover and Plenum Gasket Set for Nissan 3.5L V6
| Compatible engines | 3.5L V6 models (Nissan/Infiniti) |
|---|---|
| Includes | Valve cover gasket set and upper plenum gasket |
| Brand | WOLLVON |
| Item model number | WM0013 |
This WOLLVON gasket set bundles the valve cover gaskets and upper intake/plenum gasket designed for Nissan and Infiniti 3.5L V6 engines. It is used when replacing leaking valve cover seals or during engine work that requires removing the valve covers or plenum. The set aims to match factory-style fitment for models like the Murano and Maxima and is promoted as durable and less prone to breakage than older rubber pieces. In practice it provides a straightforward way to reseal oil and intake joints during routine maintenance or repairs, reducing oil leaks and associated smoke or oil consumption. Some users report clean fit and good value, while a few encountered fitment or sealing issues that required rework, so careful inspection at install and proper torqueing of fasteners are important. This is a useful convenience option for owners who want a ready kit for a common service job, but expect to verify mating surfaces and use correct installation procedures for a reliable seal.
Best for: Convenience-driven buyers who want a single, ready-to-install gasket kit for routine engine servicing on a Nissan Murano 3.5L V6 and prefer an off-the-shelf replacement to minimize parts hunting.
Less Ideal for: Those seeking an exact OEM-branded part with explicit warranty support or professional shops that require guaranteed fitment documentation should consider alternatives.
- Includes both valve cover and upper plenum gasket for a single service job
- Advertised as more durable and less prone to breakage than older gaskets
- Fits the Nissan/Infiniti 3.5L V6 family used in Murano and related models, simplifying parts sourcing
- Some customers reported fitment or sealing problems that required adjustments during installation
- No manufacturer warranty information is provided in the product details
Verdict A convenient, ready-made gasket kit for Nissan 3.5L V6 Murano owners that simplifies a common seal replacement but requires careful installation verification.
3. Fel-Pro HS 21157 PT-1 Engine Cylinder Head Gasket Set
| Material | Graphite, Nonstick, Steel |
|---|---|
| Manufacturer | Fel-Pro |
| Model | HS21157PT1 |
This Fel-Pro head gasket set is built to restore a solid cylinder head seal during an engine rebuild or head gasket replacement. It uses a steel core with graphite or reinforced fiber facing and a nonstick anti-friction coating to help seal small surface imperfections and reduce friction during installation. The no-retorque steel design and factory-quality sealing technologies aim to maintain clamp load without repeated retorquing, which simplifies post-install procedures. In practical use you get a full set intended to replace the factory gasket arrangement and withstand typical operating conditions after a repair. The main limitation is fitment and application era: this part is listed for older Nissan platforms and may not match late-model Murano engines, so careful vehicle fit confirmation is required before ordering. For performance-focused repairs it offers durable materials and a design intended to handle imperfect sealing surfaces common on engines that need service.
Best for: Performance-oriented buyers who prioritize durable, factory-quality sealing for an engine repair and expect materials and design that tolerate imperfect sealing surfaces.
Less Ideal for: Buyers seeking a gasket set specifically confirmed for late-model Nissan Murano engines without additional fit validation should consider Murano-dedicated options.
- Steel core with reinforced facing for strength and improved sealing durability
- Nonstick anti-friction coating helps seal small surface scratches and eases installation
- Designed to seal imperfect surfaces typical in repair environments
- No-retorque design reduces the need for repeat torque checks after installation
- Compatibility is for older Nissan models and may not fit newer Murano engines without verification
Verdict A robust, repair-focused head gasket set designed for durable sealing, but verify fitment for Nissan Murano applications before buying.
4. Dtomi Engine Valve Cover and Upper Intake/Plenum Gasket Set for Nissan 3.5L
| Brand | Dtomi |
|---|---|
| Fitment Type | Direct Replacement |
| Included Pieces | 2 valve cover gaskets + 1 upper intake/plenum gasket set |
| Compatible Vehicles | Nissan Murano 2003-2007 |
This Dtomi gasket set supplies two valve cover gaskets plus an upper intake/plenum gasket intended as a direct replacement for Nissan 3.5L engines. It is typically used when addressing oil leaks from the valve cover area or replacing aged intake seals during maintenance. The gaskets are elastomer-coated silicone designed for high-temperature and oil resistance, which helps form a conforming seal on imperfect surfaces and reduces the chance of leaks after installation. The kit references multiple Nissan part numbers for fitment and arrives with all listed pieces needed for a straightforward swap. On the downside several buyer reports note occasional quality-control defects and missing small grommet pieces, so careful inspection before installation is wise and you may need RTV or pickup grommets in some cases. For budget repairs on a Murano this kit offers a low-cost, mostly complete option, but it trades top-tier factory-level quality control for value-priced parts and may require minor prep or supplemental seals during installation.
Best for: Practical, budget-conscious owners who prioritize low parts cost when repairing a Nissan Murano and are comfortable inspecting parts and handling minor fitment tweaks during installation.
Less Ideal for: Buyers seeking factory-quality, drop-in OEM replacements with strict quality control or those who prefer parts that never require any additional sealant or small hardware purchases.
- Includes both valve cover gaskets and an upper intake/plenum gasket for a one-stop repair.
- Elastomer-coated silicone construction resists oil and high temperatures for a conforming seal.
- Sold as a direct-replacement kit that references Nissan part numbers for straightforward fitment.
- Low-cost option that lets you replace multiple seals in a single service visit.
- Some units have reported manufacturing defects or missing small grommet pieces requiring inspection or supplemental parts.
- Not backed by visible OEM-level quality control so occasional fit or finish issues can occur.
Verdict A wallet-friendly Murano gasket kit that can stop valve cover and intake leaks if you accept occasional quality-control quirks and may provide minor prep work.
5. Sorello Engine Valve Cover Gasket Set for 3.6L V6
| Compatible engines | 3.6L V6 (Murano) |
|---|
This Sorello gasket set supplies the valve cover and intake manifold seals intended for the 3.6L V6 used in Nissan Murano models. It is sold as a direct-replacement kit built to the original specifications so installation is straightforward for a competent DIYer or a technician. The seller describes a rubberized compound that resists oil leaks and heat, which in practice helps stop seepage and can reduce engine noise and heat transfer around the valve cover area. Because it includes the main sealing pieces for the valve cover and intake manifold, it streamlines a common repair and reduces the chance of needing additional parts. Limitations are that this is an aftermarket part rather than a factory-branded component and long-term durability will depend on installation and engine conditions; buyers replacing severe gasket damage may still prefer OEM parts or professional inspection. Verify vehicle year and engine before ordering to ensure correct fitment for your Murano.
Best for: Risk-averse mainstream buyers seeking a straightforward, proven repair solution to stop oil seepage on a Nissan Murano and prefer a buy-and-install replacement that matches factory fitment.
Less Ideal for: Owners wanting factory-branded parts for warranty-preserving repairs or those with heavily damaged components who should consult a mechanic for a more extensive rebuild.
- Designed as a direct replacement to match factory fit and simplify installation
- Rubberized compound intended to resist oil leaks and withstand engine heat
- Includes both valve cover and intake manifold gaskets to cover common sealing points
- Helps reduce engine noise and isolate some heat transfer around the valve cover
- Aftermarket offering so long-term life may vary compared with factory-quality parts
- No explicit material spec or lifespan rating provided
Verdict A practical, direct-replacement gasket set aimed at restoring a reliable seal on 3.6L Murano engines without requiring modification.
6. JDMSPEED Valve Cover Set with Gaskets and Spark Plug Tube Seals for VQ35DE 3.5L (Pair)
| Engine fitment | VQ35DE V6 3.5L |
|---|---|
| Package contents | 2 valve covers, 2 gaskets, 6 spark plug tube seals |
| Compatible models | Altima, Maxima, Murano, I35, Quest (listed years) |
This JDMSPEED kit supplies both left and right valve covers plus the valve cover gaskets and six spark plug tube seals so you can replace leaking or warped covers on VQ35DE 3.5L engines. It is intended as a direct-fit replacement for affected Altima, Maxima, Murano, I35 and Quest model years listed, and arrives ready for installation without instructions. In practice this is a convenience-focused repair item: you get the pair of covers and seals in one purchase which avoids dealing with non-serviceable OEM tube seals and removes the need to source parts separately. Reported benefits include good fitment, a tight seal to stop oil leaks, and resistant construction that holds up under normal engine heat. Expect to need basic mechanical skill or a shop for correct installation since instructions are not included and some runners noted minor molding flash that must be cleared. Quality varies by unit and a minority of users reported premature leaking, so plan to inspect sealing surfaces and torque to spec during installation.
Best for: Buyers prioritizing convenience and a one-stop replacement solution who want to quickly fix oil leaks on a 3.5L VQ35DE engine without sourcing multiple parts separately.
Less Ideal for: Customers seeking a lifetime, premium OEM-equivalent part or those who prefer items with full installation guidance and guaranteed long-term warranties should consider other factory-quality options.
- Includes both left and right valve covers plus gaskets and all six spark plug tube seals for a complete repair
- Designed to be a direct replacement for VQ35DE 3.5L applications for straightforward fitment
- Construction resists warping and cracking to help maintain a lasting seal against oil leaks
- Saves time compared with sourcing individual parts or attempting to rebuild non-serviceable OEM covers
- No installation instructions included so novice installers may need professional help
- Some units show molding flash or minor defects that require trimming before installation
- A minority of users reported premature leakage, indicating inconsistent long-term durability
Verdict A convenient, all-in-one replacement valve cover kit for VQ35DE 3.5L engines that makes leak repairs faster but may require careful inspection and professional installation for best longevity.
7. MITZONE Valve Cover Set with Gaskets, Bolts, Oil Cap and PCV Valve for Nissan 3.5L VQ35DE
| Brand | MITZONE |
|---|---|
| Position | Front |
| OEM Part Number | 13264-7Y010, 13264-8J102, 13264-7Y000, 13264-8J113, 264-984, 265-985 |
| Model | valve cover |
This MITZONE valve cover set replaces the front and rear covers on early VQ35DE 3.5L Nissan engines and ships with the key hardware needed for a straight swap. It is typically used to cure oil leaks, refresh deteriorated spark plug tube seals, and restore a clean sealing surface during an engine service. The kit includes both covers, valve cover gaskets, plug tube seals, bolts, an oil fill cap and a PCV valve which makes installation faster and avoids parts hunting. Buyers report generally good fitment to Murano and Maxima engines and that the covers are leak-resistant once properly installed. Important caveats are the supplied fasteners and finish quality; several users found screws prone to breakage under high torque and recommend care or upgraded hardware, and the painted exterior can chip if not handled carefully. Some experienced installers also note a small clearance area may require light modification for perfect fit on certain variants. For a balanced buyer wanting a complete, budget-friendly replacement, this kit delivers most of what you need but plan to inspect and possibly replace the fasteners during installation.
Best for: Buyers seeking a balanced, all-round repair solution who want a single kit that replaces both valve covers and all common sealing parts to fix oil leaks and simplify installation.
Less Ideal for: If you need factory-grade fasteners or a worry-free cosmetic finish without any chance of modification, consider sourcing upgraded hardware or a different premium cover set.
- Complete kit includes front and rear covers plus gaskets, plug tube seals, bolts, oil cap and PCV valve for one-stop replacement
- Designed for Nissan VQ35DE 3.5L engines so fitment and sealing surfaces match common 3.5L applications
- Many users report good leak control and straightforward installation when followed by careful prep and torqueing
- Some supplied bolts have broken for users when torqued to spec, so hardware quality is inconsistent
- Painted finish can chip or fade under high heat or rough handling, affecting appearance
- A small number of engines required minor grinding or adjustment for perfect clearance
Verdict A complete, budget-friendly valve cover replacement kit for early VQ35DE Nissan 3.5L engines that solves leaks and speeds installation but may require upgraded fasteners for long-term reliability.
Choosing the Right Nissan Murano Engine Gasket Set: Key Factors to Consider
Fitment and Compatibility
Correct fitment is the most critical factor because gaskets must match the engine's flange dimensions, bolt patterns, and passage alignments. A gasket that is even slightly misaligned can cause immediate leaks, improper sealing, or premature failure. Verify the kit explicitly lists compatibility with the Nissan Murano engine year and engine code when possible.
Compatibility also extends to included seals and O-rings that match the engine's accessory and timing cover interfaces. Kits that clearly document which model years and engine variants they fit reduce installation risk and help avoid repeat disassembly.
Gasket Material and Construction
Different gaskets are made from multi-layer steel, composite materials, rubberized cork, or elastomeric seals, and each has pros and cons. Multi-layer steel head gaskets offer strong clamping and durability under high combustion pressure, while composite or fiber blends may be suitable for lower-stress seals. Elastomeric and silicone seals are preferred for valve cover and oil pan applications where flexibility and chemical resistance matter.
Consider the thermal and chemical exposure each gasket will face. Materials that resist coolant and oil degradation and that tolerate repeated heat cycles will generally last longer and maintain sealing integrity.
Scope of the Kit (What Is Included)
Kits range from single-piece gaskets to complete engine gasket kits that include head gaskets, valve cover gaskets, oil pan gaskets, intake and exhaust gaskets, and various seals. Choose a kit that matches the scope of your repair: a head gasket replacement requires different parts than resolving a minor oil leak. Complete kits reduce the chance of missing small seals that often lead to follow-up leaks and additional labor.
Also check for included hardware or guidance on torque sequences. While many kits omit bolts, some provide seals and alignment dowels that simplify reassembly and reduce the need to source extra parts.
Durability and Heat Resistance
Engine gaskets operate in a harsh thermal environment and must retain compressive properties over many heat cycles. Look for gaskets rated for high-temperature use and made from materials known to resist compression set and thermal degradation. Durable gaskets maintain their sealing surfaces and prevent seepage of oil or coolant under prolonged operating conditions.
Durability also affects long-term maintenance intervals. Higher-quality materials can extend the time between gasket services and reduce the risk of secondary damage from leaks.
Ease of Installation and Serviceability
Install-friendly kits include clearly labeled components and cover the commonly replaced gaskets for a given job, saving time and reducing the chance of missing parts during reassembly. Gaskets that are forgiving in alignment or that include installation aids like guide pins can cut down labor time and help DIYers or technicians achieve consistent torque and sealing.
Consider whether the kit requires specialty tools or procedures for installation. Kits that match OEM-style designs and installation practices will typically integrate into standard repair workflows more smoothly.
Sealing Performance Against Oil and Coolant Leaks
The primary goal of any engine gasket set is to stop oil and coolant leakage between mating surfaces. Evaluate whether the gasket materials and sealing methods are suited to prevent seepage at common trouble points like valve covers, oil pans, timing covers, and coolant passages. Enhanced sealing features, such as proprietary coatings or molded seals, can reduce micro-leak paths.
Good sealing performance reduces the chances of cross-contamination between oil and coolant systems, lowers the risk of overheating or lubrication problems, and contributes to a quieter, cleaner engine bay.
FAQ
How do I know which Nissan Murano engine gasket set fits my vehicle?
Check the kit documentation for explicit fitment details such as model years and engine codes. Inspect the included gasket count and compare bolt patterns and passage layouts to the parts you remove. If fitment is unclear, confirm the seller or manufacturer provides compatibility information tied to your Murano's year and engine variant.
Can I replace engine gaskets myself, or should a technician do it?
It depends on your mechanical experience and the repair scope. Simple seals like valve cover gaskets are often within the reach of a competent DIYer, while head gasket replacement or full engine overhaul gaskets require precise torque sequences and sometimes specialty tools. When in doubt, consult a qualified technician to avoid damage from improper installation.
What causes gaskets to fail on a Nissan Murano engine?
Gasket failure often results from prolonged heat cycles, coolant or oil contamination, improper torque during prior installation, or age-related material degradation. Overheating and engine misfires can accelerate wear on head and intake gaskets. Regular maintenance and correct installation torque can reduce the likelihood of premature failure.
Is it necessary to replace all gaskets during an engine repair?
Not always, but replacing gaskets that are disturbed during disassembly is usually recommended to ensure reliable sealing. For major jobs such as head removal, replacing associated seals and gaskets reduces the risk of future leaks and avoids repeating labor. Assess the condition of each gasket and include those that show wear, cracking, or compression set.
What should I inspect after installing a new gasket set?
After installation, run the engine through warm-up cycles and check for external leaks around the replaced components. Monitor coolant and oil levels for a few days to ensure no cross-contamination or steady loss occurs. Re-torque bolts if the manufacturer's procedure suggests a follow-up check after initial thermal cycling.
How We Chose the Best Nissan Murano Engine Gasket Set
We selected entries based on fitment accuracy, material construction, included components, durability expectations, and ease of installation. Fitment accuracy was prioritized because correct dimensions and hole alignment are essential for reliable sealing on the Nissan Murano engine. Material construction considered gasket composition and coatings that resist oil, coolant, and heat exposure. Included components were assessed to ensure each kit contains the gaskets and seals typically needed for a common repair or overhaul scope on this vehicle. Durability expectations focused on resistance to compression set and long-term sealing under thermal cycling. Ease of installation considered whether the kit supplies necessary seals and commonly replaced pieces to avoid sourcing small parts separately. We excluded kits that lacked clear vehicle fitment information, used unclear materials specifications, or omitted key gaskets commonly required for a Murano engine service. We also filtered out partial listings that only covered a single gasket without addressing the broader repair needs for head or engine sealing work.
Our full evaluation process is outlined in our review methodology.
Conclusion
When choosing a Nissan Murano engine gasket set, prioritize fitment accuracy and material quality to ensure durable sealing and prevent recurring leaks. Match the kit scope to the job you are doing so you do not miss small seals that can cause follow-up issues. Understand the tradeoffs between ease of installation and long-term durability. Investing time in confirming compatibility and selecting the right materials will reduce the risk of repeat repairs and keep the engine running cleanly.
Explore More:
- Check out all Nissan Murano parts & accessories
- Explore Engine
- Browse all Auto Parts
