Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If your GMC Canyon is showing extra vibration, clunking during shifts, or unusual engine movement, the right engine mount can restore smooth operation and protect drivetrain components. This guide presents a short list of the top picks for GMC Canyon engine mount replacements that balance durability, fitment, and ride comfort. The shortlisted products were chosen for common real-world concerns like vibration control, long-term durability, and direct fitment. Read on to see which options match your priorities and what to consider before you buy.
Looking for other parts? See all GMC Canyon parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | DEA A2796HY Front Right Engine Mount |  |
| Most Popular A crowd favorite that many people choose with confidence | AA Ignition Engine Motor Mount Set of 2 with Heat Shield |  |
| Best Quality Built to a higher standard if you want something more solid | GM Genuine Parts 13347453 Passenger Side Engine Mount |  |
| Best Budget The cheapest option that still gets the job done reliably | DEA A5420 Front Engine Mount |  |
| Most Sold A high-volume bestseller chosen again and again | iKer 2‑Pack Engine Motor Mount Kit with Heat Shield |  |
| Best Value for Money The sweet spot between price and what you get | DEA A2906 Front Engine Mount (A2906) |  |
| Best Overall The best all-around choice for most situations | Mardarth Engine and Transmission Mount Set (4-piece) |  |
1. DEA A2796HY Front Right Engine Mount
| Position | Front Right |
|---|---|
| Manufacturer | DEA Products |
| Model | A2796HY |
The DEA A2796HY is a direct-fit front right engine mount intended to replace a worn or failed factory mount. It installs where the engine meets the chassis to reduce vibration, limit engine movement, and restore smooth power delivery under acceleration. DEA positions this as a hydraulic-style mount built to meet factory-spec dimensions and performance; buyers report it fits tightly and eliminates noticeable engine movement and vibration. Typical use is straightforward bolt-in replacement during routine repairs or when diagnosing excessive vibration or driveline noise. The mount’s construction and DEA’s aftermarket experience suggest reliable, consistent performance for everyday driving. Limitations are expected for any aftermarket mount: fit must be confirmed for the specific GMC Canyon model year and engine, and installation may require basic hand tools or lift access. Also this part is a single-side replacement so matching mounts or related components may need inspection at the same time.
Best for: Reliability-focused buyers who prioritize restoring factory-level NVH control and steady engine support rather than aftermarket performance tweaks.
Less Ideal for: Drivers seeking performance-oriented or stiffer aftermarket mounts for aggressive driving or track use should consider specialty performance mounts instead.
- Direct-fit replacement intended to match factory mounting points for easy installation
- Hydraulic-style design helps reduce engine vibration and driveline shock
- Manufactured by an established aftermarket supplier with quality testing to meet original specifications
- Positive user reports of improved ride comfort and reduced engine movement
- Compatibility must be verified for the exact GMC Canyon year and engine before purchase
- Requires basic mechanical access and tools for correct installation
Verdict A dependable, factory-style front right engine mount that restores smooth running and reduces vibration when matched to the correct GMC Canyon application.
2. AA Ignition Engine Motor Mount Set of 2 with Heat Shield
| Unit Count | 2.0 Count |
|---|---|
| Manufacturer | AA Ignition |
| OEM Part Number | 15854941, 15854939, A5365, 5365, MK5365, 5365MK |
| Item model number | 15854941AA |
This two-piece engine mount kit replaces worn mounts to reduce engine movement and dampen noise and vibration. Designed as direct replacements, the mounts include integrated antifreeze-resistant rubber and new heat shields to help prevent cracking in cold climates and protect the mount from nearby heat sources. Typical use is a like-for-like swap when a Canyon owner notices clunks, excessive shake at idle, or increased vibration under acceleration; replacing both mounts helps restore balanced engine support. Installation is straightforward for a mechanically inclined DIYer or a local shop, though some users report alignment fiddliness on certain installations so expect minor adjustments. Build quality is generally solid for an aftermarket part and the heatshield and antifreeze treatment are practical touches for longevity, but longevity varies by driving conditions and some buyers report early failures, so keep an eye on warranty or return options. The set is a budget-conscious alternative to factory replacements for routine repair needs.
Best for: Convenience-driven buyers who want an affordable, ready-to-install replacement to stop engine vibration quickly with minimal shopping or sourcing hassle.
Less Ideal for: Owners seeking guaranteed factory-quality longevity or heavy-duty use should consider manufacturer or heavy-duty mounts instead.
- Direct-replacement design intended to fit factory mounting points for compatible GM vehicles
- Includes heat shields to protect the mount from exhaust and engine heat
- Rubber is treated against freezing to reduce cracking in cold climates
- Sold as a two-piece kit so both sides can be replaced together for balanced engine support
- Aftermarket durability is inconsistent across user reports so lifespan may be shorter than factory-quality mounts
- Some installations require minor alignment or extra effort to match bolt hole spacing exactly
Verdict A convenient, budget-friendly pair of replacement engine mounts with heat shields for quick vibration fixes, but expect variable long-term durability.
3. GM Genuine Parts 13347453 Passenger Side Engine Mount
| Manufacturer | ACDelco |
|---|---|
| Manufacturer Part Number | 13347453 |
| Exterior | Machined |
| OEM Part Number | 13347453 |
This GM Genuine Parts passenger-side engine mount is a direct-fit replacement designed to restore factory engine support on a GMC Canyon. It installs where the original mount sat and is tuned to match the vehicle’s factory geometry so bolt holes and clearances align without modification. The mount uses steel interlocks and a machined exterior to secure the engine mass and control movement under acceleration and during bumps, which reduces vibration and maintains drivetrain alignment. For a performance-oriented owner the key benefits are predictable NVH behavior and the reassurance of a GM-validated part that matches factory fit and function. Installation is typical for engine mount replacement and may require engine support and hand tools or a lift for safe removal. This part focuses on OEM replacement quality rather than aftermarket performance tuning, so riders seeking stiffer mounts for aggressive track use should look elsewhere. Expect reliable, factory-like performance that returns the vehicle to its intended engine isolation and alignment.
Best for: Performance-oriented buyers who prioritize factory-correct handling and vibration control on their GMC Canyon and want a reliable, validated replacement that preserves the truck’s engineered behavior.
Less Ideal for: Drivers seeking a firmer aftermarket mount for track use or increased engine feedback should consider performance-specific options instead of this factory-style replacement.
- Factory-validated design ensures correct fit and alignment for GMC vehicles
- Machined exterior and steel interlocks provide strong, durable engine support
- Matches factory vibration control for predictable noise and ride comfort
- Direct replacement reduces installation time and need for modifications
- Not intended as a performance-stiffened mount for track or aggressive tuning
- Requires engine support and basic mechanical skill or professional installation
Verdict Buy this if you want a GM-validated, factory-quality passenger-side engine mount that restores original fit, function, and NVH control on a GMC Canyon; skip it if you need a performance-stiffened replacement.
4. DEA A5420 Front Engine Mount
| Manufacturer | DEA Products |
|---|---|
| Model | A5420 |
| Exterior | Machined |
This DEA A5420 front engine mount is a basic aftermarket replacement intended to restore engine support and reduce vibration on compatible vehicles. It installs in the front mount location and is typically used when a worn mount causes engine movement, noise, or driveline vibration. The part is machined and marketed as meeting or exceeding factory-spec performance, and many owners report easy installation and immediate improvement in engine stability. Because it is an economical aftermarket option, fit can vary by application and some users may need to trim small amounts of material for clearance during install. The mount performs the fundamental job of holding the engine steady and damping vibration but may not match the longevity or exact fit of a factory-quality part in all cases. For a budget repair on a GMC Canyon, this mount offers a low-cost way to stop engine movement quickly, though buyers should be prepared for minor fitment tweaks and accept a possible shorter service life than a higher-end replacement.
Best for: Budget-conscious GMC Canyon owners who need an inexpensive, quick solution to replace a failing front engine mount and prioritize saving money over a factory-exact part.
Less Ideal for: Drivers seeking a long-term, factory-identical replacement or those unwilling to perform minor trimming or adjustments during installation should consider higher-end or OEM alternatives.
- Affordable aftermarket replacement that reduces engine movement and vibration
- Machined exterior and construction aimed to meet factory-spec performance
- Many users report straightforward, quick installation
- Works as an immediate, low-cost repair to restore drivability
- Occasional fitment issues requiring trimming or grinding for clearance
- May not match the longevity or exact fit of a factory-quality replacement
Verdict A low-cost, functional front engine mount for a GMC Canyon that restores stability quickly but may need minor fitment tweaks and might not last as long as a factory-quality unit.
5. iKer 2‑Pack Engine Motor Mount Kit with Heat Shield
| Set Quantity | 2.0 Count |
|---|---|
| Mounting Type | Engine Bay Mount |
| Manufacturer | iKer |
| Model | Engine Motor Mount |
This iKer kit supplies right and left engine mounts intended as direct replacements for factory mounts on compatible 2007–2014 GM vehicles. It is used to secure and position the engine to the body frame and to reduce vibration and drivetrain noise during normal driving. The kit ships as a two‑pack and includes mounts constructed from metal and rubber with a heat shield provision so you can reuse factory shields if needed. Practical benefits include straightforward replacement of worn mounts to restore smoother idle, reduce engine movement under throttle, and prevent accelerated wear to other driveline components. Reported positives from installers include good fit for late‑model GM trucks and relatively simple installation for the non‑driver side. Important limitations are that material thickness may be lighter than factory parts and the driver side can be difficult to access on some models, so professional installation or patience and proper tools may be required for a clean job.
Best for: A risk‑averse mainstream buyer who wants a straightforward replacement to restore stock engine stability and NVH on their GMC Canyon by using a proven fitment for GM full‑size platforms; they prioritize reliable function over performance upgrades.
Less Ideal for: Not the best choice for buyers seeking heavy‑duty or performance mounts for towing or off‑road duty, or for those who prefer guaranteed factory‑quality components and dealer support.
- Sold as a complete right and left two‑pack so both side mounts are replaced together
- Designed to fit specified GM 2007–2014 trucks and SUVs for direct replacement
- Metal and rubber construction aimed at restoring engine support and vibration isolation
- Includes heat shield compatibility so factory shields can be reused if desired
- Some customers report thinner metal than factory parts which may affect long‑term durability
- Driver side installation can be awkward and time consuming on certain models
- Manufacturer part quality can vary compared with OEM factory‑quality mounts
Verdict A budget‑oriented two‑pack replacement that restores engine stability and reduces vibration, but may require careful installation and is not a heavy‑duty OEM equivalent.
6. DEA A2906 Front Engine Mount (A2906)
| Brand | AED |
|---|---|
| Model | A2906 |
| Manufacturer | DEA Products |
This DEA A2906 is a hydraulic front engine mount offered as a direct factory-quality replacement for certain GM-era vehicles. It installs in the front-right position and is intended to isolate engine vibration and control movement under load, restoring smoother idle and crisper shifts compared with a worn mount. The unit is painted and supplied to match factory attachment points, which makes fitment straightforward when the part number matches the vehicle application. Buyers can expect a straightforward swap with mechanics’ tools and occasional lift support for the engine. This mount’s practical benefits are reduced NVH and improved drivetrain alignment without the premium cost of a dealer part. Limitations are that it is a single-position replacement and is only correct for supported models and years, so you must confirm exact fitment for your GMC Canyon before buying, and installation can still be moderately challenging on some chassis layouts where access is tight.
Best for: Practical optimizers who want a budget-conscious, factory-quality engine mount to restore ride comfort and drivetrain behavior without paying dealer prices.
Less Ideal for: Drivers seeking specialized performance mounts or those who prefer aftermarket urethane or heavy-duty options for off-road or high-power builds should consider alternatives.
- Factory-style hydraulic design to control engine movement and damp vibrations.
- Painted finish and factory matching mounting points for straightforward replacement.
- Well-reviewed by users for fit and function on compatible GM models.
- Fitment is limited to specific vehicle applications so verification is required.
- Installation may be moderately difficult where engine access is restricted.
Verdict A cost-effective, factory-style hydraulic front engine mount that restores OEM-like vibration control for compatible GM vehicles when fitment is confirmed.
7. Mardarth Engine and Transmission Mount Set (4-piece)
| Unit Count | 4.0 Count |
|---|---|
| Mounting Type | Chassis Mount |
| Finish Type | Polished |
| Manufacturer | Mardarth |
This Mardarth kit supplies four replacement engine and transmission mounts intended to restore factory-style support and cut engine vibration on compatible 2.4L vehicles. Typically used when worn mounts cause vibration, noise, or drivetrain movement, the set includes the locations commonly replaced during a comprehensive mount service. The listing emphasizes direct-fit compatibility for 2010–2017 Captiva, Equinox, and Terrain 2.4L applications and lists multiple OEM part numbers it replaces, which helps technicians confirm fitment for the GMC Canyon 2.4L when applicable. Buyers report improved NVH and accurate fit after installation. Notable features include chassis mounting, polished finish, and parts packaged as a matched set so you replace all worn points at once. Limits to consider are that durability depends on installation and driving conditions and longevity may vary from factory parts. Also confirm exact vehicle year and engine before ordering since fit is specific to certain 2.4L configurations.
Best for: Balanced buyers who want a cost-effective, full replacement kit to restore ride comfort and reduce engine vibration while keeping maintenance straightforward.
Less Ideal for: Drivers seeking heavy-duty or performance mounts for aggressive towing or racing should choose purpose-built aftermarket units instead.
- Complete matched set of four mounts for a full-service replacement
- Direct-replacement design listed to fit specified 2.4L applications, simplifying fit checks
- Polished, factory-style finish and chassis-mount design for straightforward installation
- Fitment is specific to certain 2.4L configurations so verification is required for GMC Canyon
- Longevity may differ from factory-installed mounts depending on driving use and installation quality
Verdict A practical, full-set replacement that restores factory-style support and NVH control for compatible 2.4L GMC Canyon applications when fitment is confirmed.
Choosing the Right GMC Canyon Engine Mount: Key Factors to Consider
Fitment and Vehicle Specificity
Correct fitment is essential because engine mounts must align precisely with the engine and subframe mounting points. A direct-fit mount avoids modifications, preserves factory geometry, and reduces the risk of accelerated wear to adjacent components.
When a mount uses the wrong bolt pattern or bracket shape it can introduce stress concentrations that lead to premature failure. Always confirm that the mount is listed for the exact model year and engine configuration of your GMC Canyon to ensure proper alignment and performance.
Material and Construction
The mount material determines how well it absorbs vibration and how long it will last. Rubber compounds are common and offer good isolation, but high-quality rubber with oil- and heat-resistant formulations lasts longer in the engine bay. Some mounts use hydraulic or fluid-filled designs to dampen higher-frequency vibration more effectively.
Metal bracket design and weld quality also matter because cracked or weak brackets can break under torque and road shocks. Look for corrosion-resistant coatings and robust welds to extend service life.
Vibration Dampening Performance
A good engine mount reduces the amount of engine vibration felt in the cabin while still controlling engine movement under load. The right balance prevents excessive engine movement that can stress hoses and linkages while minimizing transmitted noise and vibration.
Consider how you use the vehicle. Daily drivers typically prioritize comfort and isolation, while heavier-duty use demands mounts that resist motion under torque spikes. Effective damping helps maintain a quieter and more comfortable driving experience.
Durability Under Heat And Fluids
Engine compartments are hot and exposed to oil, coolant, and road contaminants. Mounts made from materials that resist heat aging and chemical degradation will maintain their properties longer. Rubber that hardens or cracks will transmit more vibration and fail sooner.
Check for specifications indicating resistance to heat, oil, and ozone. Components that include protective seals or shields on fasteners can also reduce corrosion and extend usable life.
Installation Accessibility And Hardware
Some mounts are easy to access and swap with basic hand tools, while others require lifting the engine slightly or removing ancillary components. Installation accessibility affects the time and complexity of replacement and whether professional help is likely to be needed.
Confirm whether the mount includes all necessary hardware and whether the design aligns with factory torque specifications. Clear instructions and complete fasteners reduce installation errors and ensure the mount performs as intended.
Load Handling And Torque Control
Engine mounts must control both static engine weight and dynamic torque loads during acceleration and gear changes. A mount that cannot handle peak loads will allow excessive engine rotation, which can stress driveline components and lead to noise or vibration issues.
Assess whether a mount is engineered to manage the expected torque for your engine configuration. Some designs sacrifice a degree of comfort in favor of stiffer control for heavy loads, so choose based on the balance you need.
FAQ
What are common symptoms of a failing engine mount in a GMC Canyon?
Common signs include increased vibration in the cabin, particularly at idle, and clunking or banging noises during acceleration or gear changes. You may also notice excessive engine movement when revving the engine or shifting from drive to reverse.
Can I replace a GMC Canyon engine mount myself?
Many engine mount replacements can be done with basic tools if you have a secure way to support the engine. Some mounts require lifting the engine slightly, so basic mechanical experience and proper precautions are important. If access is limited or you are unsure about torque specs, professional installation is often safer.
How long do engine mounts usually last?
Lifespan depends on driving conditions, exposure to heat, and whether the mount is subjected to oil contamination. Under normal conditions, mounts often last several years, but heavy use or harsh environments can shorten life. Inspect mounts periodically for cracking, tearing, or fluid leakage if they are hydraulic designs.
Will replacing an engine mount reduce vibration and noise?
Replacing a degraded mount usually reduces vibration and can eliminate associated noise if the mount was the root cause. Results depend on whether other drivetrain components are also contributing. Proper fitment and correct installation are key to restoring intended isolation performance.
Should I choose a firmer mount for towing or heavy use?
A firmer mount can better resist engine movement under higher loads and may improve driveline stability during towing or heavy-duty use. However, firmer mounts often transmit more vibration to the cabin, so weigh the need for control against comfort preferences.
How We Chose the Best GMC Canyon Engine Mount
We focused on mounts designed specifically for the GMC Canyon and evaluated candidates against several objective criteria that matter in everyday use. Key filters included accurate vehicle-specific fitment to ensure bolt-on installation, material quality such as rubber density and metal bracket strength, and proven vibration isolation performance under load. Durability under heat and oil exposure was assessed because these factors shorten mount life in real driving conditions. We also considered ease of installation, including whether mounts allow straightforward access to fasteners, and standardized torque specifications when available. We excluded any items that required modification for fitment, universal mounts that are not vehicle-specific, and options lacking clear specification data. The result is a compact list of direct-fit engine mounts that prioritize reliability, correct alignment, and effective vibration control for GMC Canyon owners.
Our full evaluation process is outlined in our review methodology.
Conclusion
When choosing a GMC Canyon engine mount, prioritize correct fitment, durable materials, and effective vibration damping. These factors determine how well the mount controls engine movement and how long it will last under real-world conditions. Be mindful of tradeoffs between comfort and stiffness: mounts engineered for heavy loads provide better control but may increase cabin vibration. Verify installation accessibility and torque requirements so the replacement performs reliably once installed.
Explore More:
- Check out all GMC Canyon parts & accessories
- Explore Engine
- Browse all Auto Parts
