Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you want a more balanced look and slightly improved ground clearance for your Infiniti FX35, choosing the right leveling kit matters. The right kit can correct front-to-rear rake, keep handling predictable, and let you fit slightly larger tires without compromising driving comfort. This guide covers seven shortlisted Infiniti FX35 leveling kits that met our editorial filters. We evaluated ride quality and installation effort, and we explain what to expect from each type of kit before the product list.
Looking for other parts? See all Infiniti FX35 parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | MAXRACING 2-Inch Suspension Leveling Kit (Front) |  |
| Most Popular A crowd favorite that many people choose with confidence | MZS 2" Front Leveling Lift Kit |  |
| Best Quality Built to a higher standard if you want something more solid | Rough Country 2" Billet Aluminum Leveling Kit for 2004-2015 Nissan Titan |  |
| Best Budget The cheapest option that still gets the job done reliably | MZS 2.5" Front Leveling Kit Strut Spacers for Nissan Titan/Armada |  |
| Most Sold A high-volume bestseller chosen again and again | Dynofit 2" Front Leveling Lift Kit (2pcs) for Ford F-150 / Expedition |  |
| Best Value for Money The sweet spot between price and what you get | ZY WHEEL Front 2.5" Aluminum Strut Spacer Leveling Kit (2pcs) |  |
| Best Overall The best all-around choice for most situations | MotoFab Lifts F15-2.5 Front 2.5" Leveling Lift Kit |  |
1. MAXRACING 2-Inch Suspension Leveling Kit (Front)
| Fit Vehicle | 2005-2026 Ford F250 F350 Super Duty 4WD (listed) |
|---|
This MAXRACING kit is a simple front spacer setup that lifts the vehicle by two inches using billet aluminum spacers and replacement bolts for a bolt-on installation. It is typically used to correct front-to-rear rake and increase ground clearance without replacing springs or struts, and installation can be completed in a couple of hours with basic tools. The billet aluminum construction resists wear and matches factory suspension contact points, and the package includes the spacers, bolts, and instructions so you do not need additional brackets. Real-world benefits are an improved stance and the ability to run larger tires while retaining factory suspension components. Important limitations are that this product is a spacer-only solution so it does not change spring rates or damping and may affect steering geometry or axle position on some vehicles, which can require alignment or track-bar adjustments; it also specifically notes compatibility limits for certain factory trim packages. For a reliability-focused buyer, this kit offers a straightforward, low-complexity way to lift the front, but it is not a full suspension upgrade and should be paired with alignment and any necessary steering corrections for best results.
Best for: A reliability-focused buyer who wants a low-complexity, factory-friendly way to level their vehicle's front appearance and increase clearance without replacing core suspension parts.
Less Ideal for: Drivers seeking a full suspension performance upgrade or who need improved ride control under heavy loads should consider complete spring and shock solutions instead.
- Billet aluminum spacers resist wear and seat cleanly against factory suspension components.
- Includes bolts and instructions for a mostly bolt-on installation without cutting or major modification.
- True 2-inch lift that levels front ride height and allows clearance for larger tires.
- Short installation time so it can be fitted with basic tools and minimal garage time.
- Spacer-only design does not change spring rate or shock damping so ride quality may remain unchanged.
- May shift axle position or steering geometry requiring alignment and possible track-bar or caster corrections.
- Compatibility exclusions for certain factory trim packages mean fitment must be verified before purchase.
Verdict A simple, durable spacer kit for a two-inch front lift that works as a low-impact leveling solution but is not a substitute for a full suspension upgrade.
2. MZS 2" Front Leveling Lift Kit
| Auto Part Position | Front |
|---|---|
| Material | Aluminum |
| Included Components | Installation Hardware, Strut Spacer |
| Maximum Lifting Height | 2 Inches |
| Automotive Fit Type | Vehicle Specific Fit |
This MZS 2" front leveling kit uses CNC-machined aluminum spacers and included hardware to lift the front by two inches and reduce the rake between front and rear. It installs as a bolt-on upgrade and is intended to provide extra fender clearance for larger tires and a more balanced look. Typical installation takes about two hours with common hand tools, and the kit is lightweight and corrosion resistant thanks to its aluminum construction. Because it is a spacer-style lift, it preserves factory suspension components but can change suspension geometry enough that a wheel alignment is recommended after installation. The kit is vehicle-specific so fit and required procedures vary by model; some owners report simple installs while others on newer platforms needed additional adjustments to strut assembly orientation or upper control arms. This kit is best for drivers who want a quick, non-permanent front lift and improved clearance without replacing shocks or springs, but it may require alignment and occasionally extra suspension work on certain vehicles.
Best for: Convenience-driven buyers who prioritize a fast, reversible way to level the front and gain tire clearance without swapping springs or shocks.
Less Ideal for: Drivers seeking a full suspension upgrade for heavy off-road use or precise handling improvements should consider complete lift or suspension kits instead.
- True 2" front raise for noticeable fender clearance
- CNC-machined aluminum spacers resist rust and look clean
- Bolt-on installation with included hardware so no custom fabrication required
- Lightweight kit that preserves factory suspension components
- Spacer lift can alter suspension geometry and requires a front alignment
- May need additional suspension adjustments on some vehicle variants to correct camber or strut orientation
Verdict A quick, lightweight bolt-on option to level the front and add tire clearance, but expect an alignment and possible suspension tweaks for perfect fitment.
3. Rough Country 2" Billet Aluminum Leveling Kit for 2004-2015 Nissan Titan
| Material | Aluminum |
|---|---|
| Maximum Lifting Height | 2 Inches |
| Construction | Drilling Required: No |
| Automotive Fit Type | Vehicle Specific Fit |
This Rough Country leveling kit is a simple front spacer that lifts the truck about 2 inches by replacing the factory upper strut mount with a T6061 billet aluminum spacer. It is intended for bolt-in installation without drilling, so a professional or experienced DIYer can install it in a driveway with basic tools. The billet construction looks durable and resists corrosion compared with stamped parts, and customer reports say it restores level stance and can improve steering and perceived ride quality when combined with correct shocks. The kit is vehicle-specific and does not fit Pro-4X models, so confirm fitment before buying. Note that a leveling spacer raises ride height only and does not change spring rate or suspension travel, so heavier payloads or aggressive off-road use may reveal limitations; alignment and periodic hardware checks are recommended after installation. Some buyers reported parts or thickness discrepancies, so inspect the kit on receipt before fitting.
Best for: Performance-oriented buyers who prioritize a durable, factory-quality front lift to correct rake and improve front-end geometry without a full suspension overhaul.
Less Ideal for: Drivers seeking full suspension upgrades for heavy towing, aggressive off-road use, or who want to change ride firmness should choose a complete lift or new springs and shocks instead.
- Billet T6061 aluminum construction for strength and corrosion resistance
- Bolt-in design with no drilling required simplifies installation
- Designed to restore a level front stance and improve vehicle appearance
- Vehicle-specific fit reduces need for additional modifications when compatible
- Only raises the front; does not alter spring rate or overall suspension dynamics
- Not compatible with Pro-4X models and limited to the listed vehicle fitment
- Some customers reported receiving incorrect thickness or incomplete hardware
Verdict A strong, easy-to-install billet spacer for buyers who want a high-quality 2-inch front level on a compatible vehicle but not a full suspension change.
4. MZS 2.5" Front Leveling Kit Strut Spacers for Nissan Titan/Armada
| Brand | MZS |
|---|---|
| Auto Part Position | Front |
| Material | Aluminum |
| Included Components | Strut Spacers |
| Maximum Lifting Height | 2.5 Inches |
This kit uses billet aluminum strut spacers to increase front ride height and level a truck by roughly 2.5 inches. Install involves removing the front strut top, sandwiching the spacer between the strut and mount, and re-bolting for a bolt-on lift that keeps factory ride geometry largely intact. The CNC-machined spacers resist corrosion and are lightweight compared with steel replacements. In use the kit gives additional ground clearance for larger tires and a more level stance while preserving most factory ride characteristics. Because spacers add preload to the springs you may notice a firmer ride and the vendor recommends a front alignment after installation. Some buyers report fitment quirks on specific model years that can require aftermarket control arms or minor adjustments, and the spacer thickness does not equal lift in a simple 1:1 way due to spring compression. This is a cost-effective option if you only need a modest front lift, but it is not a full suspension lift and may need complementary parts for perfect fitment on some vehicles.
Best for: Budget-conscious buyers who want an inexpensive, straightforward way to add a modest front lift and fit larger tires while prioritizing cost over a full suspension overhaul.
Less Ideal for: Drivers seeking a full suspension lift, improved off-road travel, or a plush factory-like ride should consider complete lift systems rather than a spacer kit.
- CNC-machined billet aluminum construction for strength and corrosion resistance
- Bolt-on installation that typically completes in a couple hours
- Increases front ground clearance and allows fitment of larger tires while improving stance
- Adds preload and can make the front feel noticeably firmer
- Not a full suspension lift so it does not address rear ride height or suspension travel
- Some model years may require additional aftermarket parts for proper fitment
Verdict A very affordable way to gain about 2.5 inches of front lift and clearance, best for buyers who want a budget fix rather than a full suspension upgrade.
5. Dynofit 2" Front Leveling Lift Kit (2pcs) for Ford F-150 / Expedition
| Material | Aluminum |
|---|---|
| Included Components | 2pcs Strut Spacers |
| Maximum Lifting Height | 2 Inches |
| Auto Part Position | Front |
This Dynofit kit installs on top of the front strut assembly and uses machined aluminum spacers to lift the vehicle’s front end roughly 2 inches. It is typically used to level a truck that sits nose-down from the factory or to gain modest tire clearance without replacing struts or springs. The kit includes two forged aluminum strut spacers and factory-style grade 12.9 bolts and is listed for vehicle-specific fitment. In practice the spacers give a clean, durable solution that keeps the original shocks and springs while restoring a level stance and minimal change to ride quality. Installation is straightforward for a competent DIYer or shop but can require rotating the strut plate and some extra effort to reseat the strut assembly, and a post-install alignment is advisable. The product is limited by vehicle fitment and its method of lift: it raises using spacers rather than replacing dampers or springs so it will not improve load-carrying or heavy-duty off-road articulation.
Best for: Risk-averse mainstream buyers who prioritize a conservative, reversible way to level their vehicle and prefer solutions that keep most factory components intact.
Less Ideal for: Drivers seeking a suspension performance upgrade, increased payload capacity, or parts specifically for an Infiniti FX35 should look at vehicle-specific leveling options or full suspension kits instead.
- Machined forged aluminum spacers for corrosion resistance and durability
- Uses existing strut assemblies so no new shocks or springs required
- Relatively quick installation that can be completed in 1–2 hours with basic tools
- Retains factory ride characteristics while correcting front rake
- Designed for specific truck models and not compatible with Infiniti FX35 so fitment is limited
- Does not upgrade suspension damping or load capacity since it is a spacer-style lift
- Some kit hardware may be lower quality than OEM and buyers sometimes replace fasteners
Verdict A durable, low-impact spacer kit that levels the front with minimal change to ride but is only appropriate where vehicle fitment matches, not for Infiniti FX35 owners.
6. ZY WHEEL Front 2.5" Aluminum Strut Spacer Leveling Kit (2pcs)
| Auto Part Position | Front |
|---|---|
| Material | Aluminum |
| Included Components | 2 X Strut Spacers with a set of hardwares |
| Maximum Lifting Height | 2.5 Inches |
This front strut spacer kit uses billet aluminum spacers and a hardware set to lift the front by about 2.5 inches without disassembling the strut or coil. It is installed between the strut and the mounting point to change suspension geometry, giving a leveled stance and extra fender clearance for larger tires. Typical installation takes one to two hours for each side and can be done at a well-equipped shop or by a competent DIYer. The aluminum construction resists corrosion and the included hardware simplifies fitment. Limitations include the fact the kit thickness is not the same as lift height because of suspension geometry, and some model years may need specific bolt changes or alignment/camber adjustments after installation. This kit does not include shocks or camber correction components, so pairing it with an alignment and possibly upgraded dampers yields the best ride and tire wear results. For vehicles requiring precise factory-quality fitment or who want full suspension replacement parts, a complete strut or leveling system may be preferable.
Best for: Practical optimizers seeking an economical, bolt-on way to level their vehicle and gain tire clearance while prioritizing cost-effective gains over a full suspension rebuild.
Less Ideal for: Buyers who need a full suspension overhaul, precise factory-quality strut replacements, or who want built-in camber correction and new dampers should look for complete kits or strut assemblies instead.
- Raises the front approximately 2.5 inches to level stance and allow larger tires
- Billet aluminum spacers resist corrosion and provide a clean appearance
- Can be installed in about 1–2 hours without strut disassembly, reducing shop time
- Includes necessary hardware for straightforward bolt-on installation
- Does not correct camber or replace shocks so alignment and possible additional parts are needed
- Lift height is an effective value and not equal to spacer thickness due to suspension geometry
- Some model years require one-time use bolts or hardware changes during install
Verdict A budget-friendly, bolt-on aluminum spacer kit that levels the front and adds tire clearance but requires alignment and possibly additional suspension parts for best results.
7. MotoFab Lifts F15-2.5 Front 2.5" Leveling Lift Kit
| Material | Aluminum |
|---|---|
| Included Components | 2 Front lift spacers, Hardware, Instructions |
| Maximum Lifting Height | 2.5 Inches |
| Automotive Fit Type | Vehicle Specific Fit |
This MotoFab 2.5" front leveling kit uses CNC-machined billet aluminum spacers that bolt to the top of the struts to raise the front by the advertised 2.5 inches. It is intended as a vehicle-specific front lift solution and ships with the spacers, mounting hardware, and instructions. Typical installation requires removing and reinstalling the strut assembly and working around brake lines and wiring, so expect a multi-hour job for a DIYer or a quicker fitment by a shop. The kit keeps the suspension geometry largely intact compared with full suspension swaps, preserves ride quality for everyday driving, and gives a noticeable lift to improve stance and clearance. Important limitations are the height choice and its impact on CV angles and load behavior under heavy tongue or payload, and some users report fitment or hardware access challenges depending on chassis details. Alignment after installation is recommended to restore proper steering geometry.
Best for: A balanced, all-round buyer who wants a straightforward front leveling solution to improve stance and clearance without replacing the entire suspension and values a durable, factory-quality spacer approach.
Less Ideal for: Drivers who need heavy payload or towing performance or who require adjustable ride height and full suspension tuning should consider dedicated suspension upgrades instead.
- CNC-machined billet aluminum spacers for consistent fit and corrosion resistance
- Vehicle-specific fit reduces the need for additional modifications
- Simple bolt-on design that avoids strut or coil disassembly in many installs
- Includes mounting hardware and instructions for a complete kit
- 2.5 inch lift may increase CV axle angles and affect rear sag under heavy loads
- Installation can be time-consuming and requires working around brake lines and wiring
- Some users report occasional fitment or packaging issues on certain chassis
Verdict A practical, vehicle-specific 2.5" front leveling kit that delivers a reliable lift and clean look for buyers seeking a simple, durable solution rather than a full suspension overhaul.
Choosing the Right Infiniti FX35 Leveling Kit: Key Factors to Consider
Lift Height and Leveling Amount
The amount of lift the kit provides directly affects how level the vehicle will sit and what tire sizes you can safely fit. Small increments are common for this category because the FX35 is not designed for large suspension lifts. Choose a height that corrects the rake without altering suspension geometry excessively.
Excessive lift can cause increased wear on ball joints and CV components and may change steering feel. When evaluating lift amount, consider how the new ride height interacts with bump stop travel and wheel well clearance to avoid rubbing during full suspension compression.
Impact on Ride Quality
Different kit designs affect ride comfort in different ways. Components that raise the front without changing spring rates tend to preserve the factory ride, while spacer-style kits are usually less intrusive. However, any change in suspension height can alter damping characteristics and may make the ride feel firmer or softer.
Think about daily driving conditions and whether you want to prioritize a smooth highway ride or a slightly stiffer feel for handling. Minor changes are often unnoticeable, but confirm that the chosen approach aligns with your expectations for comfort and control.
Installation Complexity
Installation difficulty varies from simple top-hat spacers to kits that require strut disassembly or specialized alignment afterward. Some kits can be completed with basic hand tools in a home garage, while others are better handled by a professional because they require spring compressors or precise torque sequences.
Plan for installation time, whether you have access to an alignment shop after installation, and whether the kit's instructions are clear. Kits that minimize disassembly tend to reduce labor costs and the risk of installation errors.
Materials and Build Quality
Durable materials resist corrosion and maintain structural integrity under load. Look for powder-coated steel, CNC-machined aluminum, or high-strength composites where applicable. Good fasteners and bushings also matter because they affect noise, looseness, and long-term reliability.
Inferior materials can lead to early failure or fitment issues. Evaluate warranty information and whether replacement hardware is readily available to protect your investment over time.
Alignment and Handling Effects
Raising the front of the FX35 changes suspension geometry, which can affect camber and toe settings. Some kits include alignment correction components or specify alignment tolerances to maintain predictable handling. Without proper alignment, you may experience uneven tire wear or wandering steering.
Factor in the need for a post-install alignment and whether additional control arms or adjustable components are required to restore factory handling. Choosing a kit that minimizes geometry changes can reduce the need for extra adjustments.
Compatibility and Fitment
Fitment for the FX35 depends on model year, existing suspension condition, and wheel and tire combinations. Confirm the kit is designed for the vehicle chassis and year range you own. Consider how the kit interacts with factory equipment such as sway bar links, sensors, and brake lines.
Be cautious of kits that require trimming or other modifications. Proper fitment reduces installation surprises and ensures the leveling kit performs as expected without causing interference with other components.
FAQ
Will a leveling kit change the ride quality of my Infiniti FX35?
A small front lift usually has minimal effect on ride comfort because it does not alter spring rates. However, any change in ride height can subtly change damping and steering feel. The impact often depends on the kit design and whether it alters suspension geometry.
Do I need an alignment after installing a leveling kit?
You will often need a wheel alignment after installation, especially if strut components are disassembled or adjustable parts are used. Alignment helps correct camber and toe changes and reduces the risk of uneven tire wear and steering issues.
Can I install a leveling kit at home without professional tools?
Some spacer-style kits can be installed with basic tools and a safe way to support the vehicle. Kits that require spring compression or strut disassembly are better handled with proper tools or by a professional to avoid injury and ensure correct reassembly.
Will a leveling kit affect my vehicle warranty or inspections?
Modifying suspension height can have implications for warranty coverage and local vehicle inspections depending on jurisdiction and warranty terms. It usually depends on whether the modification causes a related failure, so check applicable policies and regulations in your area.
How much lift is appropriate for the Infiniti FX35?
Most drivers choose a modest front lift that corrects rake without altering suspension geometry dramatically. Large lifts are uncommon and can introduce handling and wear concerns. Match the lift amount to your intended tire size and everyday driving needs.
How We Chose the Best Infiniti FX35 Leveling Kit
We prioritized parts designed specifically for the Infiniti FX35 and focused on components that preserve factory ride characteristics and maintain safe suspension geometry. Key evaluation criteria included material quality and durability, measured lift height and how well it levels the vehicle, effects on ride quality and handling, and installation complexity including whether specialized tools or alignment are typically required. We also considered compatibility with common wheel and tire offsets for the FX35 and whether the kit required modifications to other suspension components. Units that introduced known alignment or steering issues, or that required cutting or permanent alteration to structural components, were excluded. We did not include general truck or SUV kits unless they explicitly fit the FX35 without adaptation. The result is a short list of options that prioritize fit, reliability, and predictable on-road behavior.
Our full evaluation process is outlined in our review methodology.
Conclusion
Choosing an Infiniti FX35 leveling kit means balancing improved stance and modest clearance gains against potential changes in handling and the need for alignment. Prioritize kits that specify fitment for the FX35, use durable materials, and minimize suspension geometry changes. Consider installation complexity and whether you can perform the work yourself or will need professional help. When you match lift amount to tire size and driving habits, you get a cleaner look with predictable on-road behavior.
Explore More:
- Check out all Infiniti FX35 parts & accessories
- Explore Suspension & Steering
- Browse all Accessories
