Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you want a lower stance and crisper handling for your Acura TSX, choosing the right lowering springs matters. The wrong springs can make the ride harsh or create fitment headaches, while the right set can improve body control, reduce fender gap, and retain everyday comfort. This guide covers our shortlisted options for Acura TSX lowering springs, explaining the key specs we evaluated and what to expect from each type. Read on to understand how drop height, spring rates, and build quality influence on-road behavior before you inspect the product details.
Looking for other parts? See all Acura TSX parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | D2 PRO Lowering Springs for 2018+ Camry |  |
| Most Popular A crowd favorite that many people choose with confidence | Godspeed Traction-S Lowering Springs for Acura TSX (CM) 2003–2007 |  |
| Best Quality Built to a higher standard if you want something more solid | Eibach PRO-KIT Lowering Suspension Spring Kit (4 Springs) |  |
| Best Budget The cheapest option that still gets the job done reliably | Truhart Lowering Springs for 2004–2008 Acura TL (2.0" Front / 2.0" Rear) |  |
| Most Sold A high-volume bestseller chosen again and again | FAPO PS Series Adjustable Mono-Tube Coilovers for 2012–2019 Honda Accord / 2015–2020 Acura TLX |  |
| Best Value for Money The sweet spot between price and what you get | Touring Tech Performance Lowering Springs for Mustang (Front 1.6" / Rear 2.0") |  |
| Best Overall The best all-around choice for most situations | BMR Suspension SP001R Lowering Springs – 1.25" Drop (set of 4) |  |
1. D2 PRO Lowering Springs for 2018+ Camry
| Material | Chrome Silicon Steel |
|---|---|
| Manufacturing Process | Cold-wound and heat-treated |
| Spring Design | Progressive-rate coils |
| Fitment | Direct factory replacement |
| Certification | ISO 9001 and TUV |
These D2 PRO lowering springs are engineered to drop the vehicle height and sharpen cornering by using progressive-rate coils and high-tensile chrome silicon steel construction. They are typically used as a direct factory-quality replacement to lower the car, reduce body roll, and improve road response without converting to coilovers. Notable features include cold-wound, heat-treated manufacturing for consistent spring rates, a corrosion-resistant finish, and bench testing plus ISO 9001 and TUV manufacturing oversight. In practice the springs give a sportier stance, firmer mid-corner support, and improved aerodynamics from the lower center of gravity while retaining a reasonably comfortable daily ride. Limitations are that springs alone do not adjust damping, so ride harshness can increase on rough roads compared with stock, and alignment and possible bump stop adjustments are required after installation. These are a solid, reliability-minded choice when you want durable, repeatable lowering with minimal maintenance rather than a fully adjustable suspension conversion.
Best for: A reliability-focused buyer who prioritizes durable, factory-quality hardware and consistent, long-term performance when lowering their Acura TSX for improved handling without moving to adjustable coilovers.
Less Ideal for: Drivers seeking fully adjustable ride height and damping control or those wanting a plush stock-like ride on very rough roads should consider a different suspension solution.
- Progressive-rate design balances handling improvements with everyday ride comfort
- High-tensile chrome silicon steel with heat treatment for consistent spring rates and durability
- Direct factory-quality replacement fitment intended for straightforward installation
- Corrosion-resistant finish to help long-term appearance and reduce degradation
- Does not include adjustable damping so suspension tuning is limited to springs alone
- May require alignment and additional chassis adjustments after installation
- Designed for specific vehicle fitment so compatibility must be confirmed for Acura TSX
Verdict Durable, performance-oriented lowering springs that give reliable handling gains for a driver who wants a long-lasting, factory-quality drop rather than adjustable suspension control.
2. Godspeed Traction-S Lowering Springs for Acura TSX (CM) 2003–2007
| Compatible vehicle | Acura TSX (CM) 2003-2007 |
|---|---|
| Set quantity | Set of 4 |
| Manufacturer part number | LS-TS-HA-0003 |
These Godspeed Traction-S lowering springs replace the factory springs on Acura TSX (CM) 2003–2007 models to lower ride height, firm up the suspension, and reduce body roll during cornering. They are installed as a direct-fit replacement and are typically used by drivers who want a sharper, more connected feel without changing dampers. Key practical benefits include a noticeable reduction in squat and lean during aggressive driving and a stiffer spring rate that improves turn-in and mid-corner stability. Because they lower the car, they also improve the look by reducing wheel gap. Limitations to expect are a firmer ride over rough surfaces and the potential need for a wheel alignment and minor suspension adjustment after installation. These springs do not include shocks or struts, so pairing them with compatible shocks may be necessary for optimal ride quality and suspension longevity. Installation is straightforward for a competent DIYer but shops can handle fitment quickly for convenience-focused buyers.
Best for: Convenience-driven buyers who want a simple, bolt-on way to sharpen handling and improve the TSX's stance without extensive suspension modification.
Less Ideal for: Drivers seeking a plush, comfort-focused daily ride or those who plan extensive suspension tuning and need a full coilover solution instead.
- Direct-fit design for Acura TSX (CM) 2003–2007 for straightforward installation
- Reduces body roll and improves cornering responsiveness
- Gives a lower, more aggressive stance by reducing wheel gap
- Durable aftermarket spring construction intended for repeated use
- Does not include shocks or struts so dampers may need replacement or adjustment to match springs
- Firmer ride quality that may transmit more road harshness
Verdict A practical, direct-fit lowering-spring kit that tightens handling and improves stance on the Acura TSX (CM) while keeping installation simple.
3. Eibach PRO-KIT Lowering Suspension Spring Kit (4 Springs)
| Brand | Eibach |
|---|---|
| Model | PRO-KIT |
| Application note | Lowering, 4 Coil Springs |
| Exterior | Powder Coat |
The Eibach PRO-KIT is a four-spring lowering kit that reduces ride height while using a progressive coil design to preserve ride quality. Installed as a direct replacement for the factory springs, it firms up body control and reduces squat and roll under acceleration and cornering, making it suitable for drivers who want more responsive handling without a harsh ride. The black powder coat protects the springs from corrosion and the progressive rate helps the car absorb small bumps while resisting large compressions. Expect a modest fixed drop and a slightly stiffer ride compared with stock springs, and plan for an alignment after installation; some drivers may need rear camber adjustment to avoid increased tire wear. This kit does not include shocks or camber hardware, so it pairs best with properly matched dampers and alignment adjustments to realize the handling benefits.
Best for: Performance-oriented buyers seeking a high-quality lowering spring to sharpen handling and reduce body motion while keeping everyday rideability.
Less Ideal for: Drivers who want adjustable suspension height, a factory-soft ride, or a plug-and-play package that includes shocks and alignment hardware should consider other options.
- Progressive spring rates balance improved handling with usable ride comfort.
- Durable powder coat finish helps resist corrosion in normal road use.
- Direct-replacement spring kit simplifies installation for suspension shops or experienced DIYers.
- Designed to reduce body roll and improve turn-in response for sportier driving.
- Does not include dampers or camber correction hardware so additional parts or adjustments may be required.
- Fixed lowering amount may not suit drivers seeking adjustable ride height or extreme drop.
- Fitment and performance depend on proper pairing with suitable shocks and alignment.
Verdict A well-regarded performance lowering spring kit that tightens handling and preserves usable ride quality but requires compatible dampers and alignment to avoid tire wear.
4. Truhart Lowering Springs for 2004–2008 Acura TL (2.0" Front / 2.0" Rear)
| Brand | Truhart |
|---|---|
| Position | Lower |
| Manufacturer Part Number | TH-H408 |
These Truhart lowering springs replace the factory springs to lower the car roughly 2.0 inches front and rear, giving a flatter stance and firmer handling compared with stock ride height. They are typically used by owners who want an affordable visual and handling upgrade without the cost of coilovers. The springs are a direct-fit replacement and are intended for the TL chassis from the 2004–2008 model range; installation is a standard spring swap with a shop alignment recommended afterward. In real-world use they tend to settle over a few weeks, delivering reduced body roll and a sportier appearance while keeping a mostly usable ride for daily driving. Limitations include a firmer ride and less adjustability than height-adjustable systems, and you may need suspension bushings or alignment tweaks to avoid uneven tire wear. These springs are best as a low-cost way to lower and tighten the handling on a TSX-focused build when compatible fitment is confirmed by a technician.
Best for: Budget-conscious owners seeking an inexpensive way to lower their Acura and get a sportier stance and tighter handling without replacing the entire suspension system.
Less Ideal for: Drivers who want adjustable ride height, a plush daily ride, or track-focused damping control should consider coilovers or adjustable suspension alternatives instead.
- Direct-fit replacement designed to lower ride height about 2.0 inches front and rear for the specified TL application
- Produces firmer handling and reduced body roll compared with stock springs
- Affordable option compared with coilovers or adjustable suspension kits
- Generally settles to a consistent height within weeks of installation
- No height adjustability or damping control compared with coilovers
- Can make the ride noticeably firmer and transmit more road harshness
- May require alignment and inspection of suspension bushings to prevent uneven tire wear
Verdict A low-cost, direct-fit lowering spring package that gives a sportier stance and firmer handling for a budget-focused Acura project, at the expense of adjustability and some ride comfort.
5. FAPO PS Series Adjustable Mono-Tube Coilovers for 2012–2019 Honda Accord / 2015–2020 Acura TLX
| Application | Honda Accord 2012–2019; Acura TLX 2015–2020 |
|---|---|
| Design | Mono-tube coilover with adjustable camber plate |
| Adjustability | Height adjustable 1–3 inches; spring preload adjustable |
| Spring rate | Front 8 kg/mm; Rear 6 kg/mm |
These FAPO PS series coilovers replace the factory suspension with adjustable mono-tube shocks and threaded spring perches to lower the car 1–3 inches and tune ride height. They are built around a mono-tube damper for improved damping consistency and heat dissipation, and include adjustable camber plates so you can correct alignment after lowering. The kit also has silicone dust covers, a high-quality shock oil formulation, and treated surfaces for corrosion resistance. In practice the kit is intended for professional installation and gives a firmer, more controlled feel with better cornering response compared with stock springs, but it is not designed to retain factory ride height and the dampers are not externally adjustable for compression or rebound. Buyers should expect a sportier ride and to spend time on alignment and setup to get the intended handling benefits. This is a value-focused lowering kit that emphasizes improved handling and durability over ride comfort fine-tuning.
Best for: A risk-averse mainstream buyer looking to improve handling and stance on a compatible Acura TLX while prioritizing a vehicle-specific, durable suspension upgrade from a known kit series.
Less Ideal for: Drivers who want an OEM-like ride quality, extensively tunable dampers, or those unwilling to have their car lowered and then aligned professionally should consider other options.
- Vehicle-specific fitment for the listed Accord and Acura TLX model years
- Mono-tube design for consistent damping and better heat dissipation
- Adjustable ride height with threaded spring perch for 1–3 inch lowering
- Includes adjustable camber plates to correct alignment after lowering
- Silicone dust covers and treated surfaces to resist contamination and corrosion
- Dampers are not externally adjustable for compression or rebound, limiting fine-tuning of ride control
- Intended to lower the vehicle rather than restore factory ride height, so comfort is reduced compared with stock suspension
Verdict A cost-conscious, vehicle-specific coilover kit that lowers the car and sharpens handling but does not offer external damper tuning or factory ride preservation.
6. Touring Tech Performance Lowering Springs for Mustang (Front 1.6" / Rear 2.0")
| Material | 55 chrome silicon steel |
|---|---|
| Front drop | 1.6 inches |
| Rear drop | 2.0 inches |
| Manufacturer part number | TT-F207 |
These Touring Tech lowering springs replace the factory coil springs to lower ride height and firm up handling for a sportier feel. They are typically installed as a set with the front specified at 1.6 inches and the rear at 2.0 inches reduction, and they use 55 chrome silicon steel intended to exceed factory-strength standards. In real-world use the springs deliver a visibly lower stance and crisper cornering compared with stock springs, and several buyers report they achieve the expected height and acceptable ride comfort rather than an overly harsh setup. They are offered as a standalone spring option or paired with Touring Tech shocks for a matched kit. Limitations include the need for proper alignment after installation and the possibility of a firmer ride that may not suit drivers who prioritize comfort; professional installation is recommended to ensure correct fit and avoid interference with suspension or fender clearance. These springs are a practical, budget-focused way to lower a car and sharpen handling when paired with appropriate dampers.
Best for: Practical optimizers who want a clear handling and style upgrade on a budget and are willing to coordinate installation and alignment to get predictable results.
Less Ideal for: Drivers who prioritize plush ride quality or who do not want to undertake alignment and suspension tuning after lowering should consider a softer or adjustable solution instead.
- Uses 55 chrome silicon steel for greater tensile strength than typical factory springs
- Specified front and rear drop rates to achieve a noticeable lowered stance
- Available option to pair with Touring Tech shocks for a matched suspension setup
- Reported to fit correctly and deliver expected ride height when installed properly
- May increase ride firmness compared with stock springs, reducing comfort on rough roads
- Requires alignment and possibly additional suspension adjustments after installation
Verdict A budget-focused lowering spring set that delivers a noticeable drop and firmer handling when installed and aligned, ideal for buyers optimizing performance per dollar.
7. BMR Suspension SP001R Lowering Springs – 1.25" Drop (set of 4)
| Drop | 1.25 inches |
|---|---|
| Fitment years | 1993-2002 Camaro, Firebird |
| Material | Chrome silicon high-tensile spring wire |
| Finish | Powder Coat |
These BMR SP001R springs are aftermarket lowering coils that reduce ride height by 1.25 inches and are tuned to firm up body control and cornering. They are typically used by enthusiasts who want a lower stance plus crisper handling on street-driven cars. Built from high-tensile chrome silicon wire, cold wound, stress-relieved, and shot-peened, the springs are intended to deliver consistent spring rate and resistance to sag over time. In practice they flatten body roll and reduce wheel deflection in hard turns, but they also transfer more road feel to the cabin compared with stock springs. Installation requires standard suspension disassembly and a spring press for the front struts, so expect a shop visit unless you have the right tools. Finish and durability are strong points, and the manufacturer backs the springs with a lifetime against sag. They are a solid choice if you want a balance of improved handling and an aggressive lowered look, though occupants will notice a firmer ride on rough roads.
Best for: Balanced buyers who prioritize an even mix of improved handling and visual lowering and are comfortable accepting a firmer street ride for better cornering.
Less Ideal for: Drivers seeking a plush, comfort-oriented daily ride or those who need a direct fit specifically engineered for an Acura TSX should look elsewhere.
- Consistent, fine-tuned spring rate for improved cornering and reduced body roll
- Manufactured from high-tensile chrome silicon wire with stress relief and shot-peening for durability
- Lifetime warranty against spring sag provides long-term peace of mind
- Powder-coated finish resists corrosion and maintains appearance
- Designed for GM F-body fitment and not specified for Acura TSX compatibility
- Stiffer spring rate increases road harshness compared with stock springs
- Front installation requires a spring press or professional installation
Verdict Well-built lowering springs that sharpen handling and stance for street performance, but they increase road harshness and are fitted for GM F-body cars rather than the Acura TSX.
Choosing the Right Acura TSX Lowering Springs: Key Factors to Consider
Drop Height and Ride Height
Drop height directly affects appearance, wheel fitment, and suspension geometry. A moderate drop reduces fender gap and lowers the center of gravity for improved cornering, while an excessive drop can cause rubbing, reduced suspension travel, and increased bottoming on uneven roads.
Think about how you use the car daily. If you frequently encounter speed bumps or steep driveways, choose a smaller, conservative drop to preserve clearance. If appearance and track-focused performance are top priorities, a larger drop may be acceptable, but plan for potential compromises in comfort and usability.
Spring Rate and Handling Balance
Spring rate determines how much the car resists body roll and how it transfers load during cornering and braking. Higher rates typically yield firmer handling and less body roll, but they can also make the ride harsher over bumps. Matching front and rear rates is important to maintain neutral handling characteristics for the Acura TSX.
Consider the balance between everyday comfort and spirited driving. If you want precise turn-in without a skittish rear end, look for rates that are tuned to the vehicle's weight distribution and original dampers. Keep in mind that heavily stiffer springs may expose limitations in the stock shock absorbers.
Compatibility With Stock Dampers
Lowering springs are often paired with the factory shock absorbers, so compatibility matters for ride quality and component longevity. Springs that lower the car significantly can change the damper's working range and affect rebound and compression control, sometimes leading to premature wear or a compromised ride.
Check whether the springs are designed to work with original dampers or whether they recommend shock or strut upgrades. If you prefer not to replace dampers, prioritize springs that are specified to retain acceptable damper travel and performance.
Installation and Alignment Requirements
Proper installation affects safety and handling. Lowering springs require careful mounting and usually a wheel alignment afterward to correct camber, toe, and ride height. Incorrect installation can lead to uneven tire wear, pulling, or poor steering response.
Factor in whether you will install the springs yourself or use a shop. Some springs include hardware or instructions that simplify installation. Always plan for a post-installation alignment and inspect related components like mounting plates, bump stops, and sway bar links for wear.
Build Quality and Corrosion Resistance
Material quality and protective coatings impact longevity, especially in climates with road salt or heavy moisture. High-quality springs use consistent metallurgy and finishes that resist rust and maintain spring rates over time.
Look for specifications on coating types and manufacturing standards. Durable springs retain their shape and performance through many compression cycles, reducing the risk of sagging or failure that would affect ride height and handling.
Progressive Versus Linear Spring Design
Progressive springs change stiffness as they compress, offering a softer initial stroke for comfort and stiffer behavior under heavier loads or aggressive cornering. Linear springs provide a consistent rate throughout travel, which some drivers prefer for predictable handling and predictable tuning.
Choose progressive springs if you want a compromise between daily comfort and occasional spirited driving. Opt for linear springs when consistent response and straightforward tuning are more important, especially if you plan further suspension upgrades.
FAQ
How much do lowering springs usually lower an Acura TSX?
Lowering springs commonly reduce ride height by a modest amount, often in the range that balances appearance and clearance. The exact drop depends on the spring design and specified front and rear heights. Check the product specifications for stated drop ranges to match your clearance needs.
Will I need new shocks after installing lowering springs?
It depends on the spring drop and the age of your existing shocks. Many modern shocks tolerate moderate drops, but larger drops or older dampers may experience reduced travel and degraded performance. Inspect shock condition and consider replacement if the dampers show wear or if the manufacturer recommends updated shocks.
Are progressive lowering springs better than linear springs?
Progressive springs offer variable stiffness that can improve comfort under light loads and firm up during aggressive driving. Linear springs deliver consistent response and are often preferred for predictable handling and tuning. The best choice depends on whether you prioritize daily comfort or consistent track-oriented performance.
How difficult is lowering springs installation?
Installation difficulty ranges from moderate to advanced depending on tools and experience. Front strut assemblies may need spring compressors and careful handling, while rear springs can be more accessible. Most installations require a proper torque procedure and a post-installation wheel alignment for safe, predictable handling.
Will lowering springs affect tire wear or alignment?
Yes, lowering springs change suspension geometry and typically require a wheel alignment afterward. Without alignment, you can see increased or uneven tire wear and altered steering behavior. Correcting camber and toe settings after installation helps preserve tire life and handling balance.
How We Chose the Best Acura TSX Lowering Springs
To assemble this list we filtered available lowering springs for the Acura TSX using practical, application-focused criteria relevant to owners seeking improved handling without sacrificing daily usability. We prioritized verified drop height ranges that suit common driving conditions and fender clearance, and we evaluated spring rates for front and rear balance to preserve predictable steering and limit unwanted understeer or oversteer. Durability and corrosion resistance were considered by favoring springs with protective coatings and proven material specifications. We also examined ride quality reports to avoid options that produce overly harsh responses on typical road surfaces. Fitment accuracy and installation compatibility were required; items lacking clear vehicle-specific fit information were excluded. Finally, we considered whether the springs maintain proper alignment geometry or require only standard alignment adjustments after installation.
Our full evaluation process is outlined in our review methodology.
Conclusion
Choosing the right Acura TSX lowering springs is about managing tradeoffs between appearance, handling, and daily comfort. Prioritize realistic drop heights and spring rates that match your driving style and the condition of the vehicle's dampers. Also account for installation and alignment needs, and favor springs with durable finishes to avoid premature corrosion. Focusing on these criteria will help you get a controlled, predictable ride without unexpected compromises.
Explore More:
- Check out all Acura TSX parts & accessories
- Explore Suspension & Steering
- Browse all Auto Parts
