Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you drive a Jeep Wrangler hard on trails or tow heavy loads, elevated steering fluid temperatures can shorten component life and cause fade. Choosing the right power steering cooler helps keep fluid temperatures lower, preserves seals and hoses, and maintains consistent steering feel under stress. This guide covers our seven shortlisted Jeep Wrangler power steering cooler options and explains the key factors we used to evaluate them. Read on to learn which features matter most and what to look for when picking a cooler for your Wrangler.
Looking for other parts? See all Jeep Wrangler parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | A-Premium Power Steering Cooler (replacement for 68069566AA) |  |
| Most Popular A crowd favorite that many people choose with confidence | PartsFlow Power Steering Oil Cooler 918-300 |  |
| Best Quality Built to a higher standard if you want something more solid | Dorman Power Steering Cooler 918-341 |  |
| Best Budget The cheapest option that still gets the job done reliably | Derale 2-Pass Power Steering Cooler Kit |  |
| Most Sold A high-volume bestseller chosen again and again | Mopar Power Steering Cooler (68069651AC) |  |
| Best Value for Money The sweet spot between price and what you get | Aumzong Power Steering Cooler (15009093) |  |
| Best Overall The best all-around choice for most situations | Dorman Power Steering Cooler 918-301 |  |
1. A-Premium Power Steering Cooler (replacement for 68069566AA)
| Material | Aluminum |
|---|---|
| Inlet fitting diameter | 0.315 inch |
| Outlet fitting diameter | 0.394 inch |
| Manufacturer part number | APPSC002 |
This A-Premium power steering cooler replaces a worn or inefficient factory cooler and is built from a high-efficiency aluminum heat sink to speed heat dissipation from steering fluid. It is typically installed in the cooling loop to lower fluid temperature, which helps prevent steering feel problems like sticking, chatter, and accelerated wear on seals and hoses. The listing identifies the cooler as a professional replacement that matches factory fitment and includes inlet and outlet fitting diameters for straightforward plumbing. Practical benefits include improved fluid viscosity stability under load and reduced stress on the steering pump during towing or heavy use. Limitations are that installation requires matching the vehicle fittings and brackets and the cooler uses basic rivet-style mounting that some users noted is less robust than factory-braced brackets, so reinforcement may be advisable for high-vibration or off-road use. The part comes with a one-year unlimited-mileage guarantee from the maker.
Best for: Reliability-focused buyers who prioritize restoring factory cooling performance and preventing heat-related steering wear, especially those who prefer straightforward, factory-style replacement parts.
Less Ideal for: Buyers seeking a heavy-duty aftermarket cooler with reinforced mounting for extreme off-road or commercial-duty use should consider purpose-built upgrade options instead.
- Aluminum heat sink for faster dissipation of steering fluid heat
- Sold as a direct replacement that matches factory fitting references
- Includes published inlet and outlet fitting diameters to simplify hose connections
- Generally reported to fit correctly across listed compatible vehicles
- Mounting uses simple rivet attachment which may be less sturdy than factory-braced brackets
- Fitment and installation require careful matching to vehicle fittings and bracket locations
Verdict A cost-conscious, factory-style aluminum cooler that restores steering fluid cooling and reliability but may need reinforced mounting for extreme duty.
2. PartsFlow Power Steering Oil Cooler 918-300
| Material | Aluminum |
|---|---|
| Reference Number | 918-300, 15009093 |
This PartsFlow power steering oil cooler is a direct-replacement cooler intended to regulate power steering fluid temperature and prevent heat-related wear. It installs in place of the factory cooler on compatible GM SUVs and trucks and is typically used when the original cooler is leaking, corroded, or underperforming. Constructed from aluminum, it resists rust better than older steel units and bolts up with factory-style mounting points for an easy swap. The cooler improves steering reliability by reducing fluid temperature under load, which can cut down on leaks and extend the life of steering components. Expect simple bolt-on installation for a competent DIYer or a quick shop job. It is a single-purpose part so it does not include hoses, fittings, or installation hardware beyond the cooler itself, and compatibility is limited to the listed vehicle models, so verify fitment before purchasing.
Best for: Buyers who prioritize convenience and a quick, no-fuss replacement for a failing power steering cooler on supported GM SUVs and trucks and want a durable, corrosion-resistant part that installs like the factory unit.
Less Ideal for: Owners needing a cooler for a Jeep Wrangler or who require a universal cooler or a kit with hoses and fittings should look for a different product tailored to that vehicle or a complete installation kit.
- Aluminum construction reduces corrosion compared with original steel coolers
- Direct-fit design with factory-style mounting for straightforward installation
- Helps lower power steering fluid temperature to protect steering components
- Positive owner feedback reporting good fit and solid build quality
- Does not include hoses, fittings, or additional mounting hardware
- Compatibility limited to specific GM models so it will not fit Jeep Wrangler models listed in the article goal
Verdict A corrosion-resistant, direct-fit aluminum replacement cooler that makes a fast, reliable swap on the supported GM vehicles but is not suitable for Jeep Wrangler fitment.
3. Dorman Power Steering Cooler 918-341
| Material | Aluminum |
|---|---|
| Manufacturer | Dorman Products |
| Model | Power Steering Cooler |
| Compatible Vehicles | Select Dodge/Ram models (see fitment) |
This Dorman power steering cooler replaces a failed or worn original cooler and is built to match factory fit and function on specified Dodge and Ram models. Constructed from aluminum with corrosion-resistant finishes, it is installed in the vehicle underbody to help drop operating fluid temperatures and protect the power steering system during heavy use. The design emphasizes durability and straightforward replacement so installers can swap it in without major modifications. Its main practical benefits are reliable cooling under load, a direct-fit approach that preserves routing and mounting, and materials meant to resist corrosion over time. Limitations are that fitment is vehicle-specific so you must confirm trim and year match, and the cooler does not include hoses or fittings beyond the unit itself, so some installations may require additional parts. For performance-oriented owners seeking a robust, factory-quality cooling upgrade, this unit provides a durable, like-for-like solution.
Best for: Performance-oriented buyers who prioritize maintaining factory-level cooling and durability during heavy-duty towing, hauling, or spirited driving.
Less Ideal for: Buyers who need a universal cooler for multiple vehicle types or who want a complete kit with hoses and fittings included should consider other options.
- Direct replacement designed to match original fit and mounting for specified vehicles
- Aluminum construction offers good thermal transfer and corrosion resistance
- Engineered for reliable long-term performance under heavy steering loads
- Compatible only with specific Dodge/Ram model years so fit must be verified before purchase
- Does not include hoses or additional fittings needed for some installations
Verdict A durable, factory-quality direct-replacement cooler for performance-focused owners who need reliable power steering fluid cooling on compatible Dodge and Ram trucks.
4. Derale 2-Pass Power Steering Cooler Kit
| Model | 2-Pass Power Steering Cooler |
|---|---|
| Inlet Size | 11/32 inch hose barb inlets |
| Tubing | 1/2 inch copper tubing expanded into aluminum fins |
| Finish | Painted |
The Derale 2-Pass Power Steering Cooler Kit is a compact aftermarket cooler that routes power steering fluid through 1/2 inch copper tubing expanded into aluminum cooling fins to lower operating temperature. It installs inline with existing power steering lines using 11/32 inch hose barb inlets and is typically mounted in front of the radiator or in a location with direct airflow. For Jeep Wrangler use it offers a budget-friendly way to reduce heat-related pump wear and help prevent fluid breakdown during hard or sustained steering loads. The painted finish resists surface corrosion and the small footprint gives flexible mounting options, but the kit requires buying appropriate hose and clamps and some trimming or adapter fittings may be necessary for Wrangler plumbing. This is a basic, low-cost cooler rather than a heavy-duty, high-capacity unit so it is best for light towing, off-road trail use, and everyday driving where occasional extra cooling is helpful.
Best for: Budget-conscious Jeep Wrangler owners who want an inexpensive way to lower power steering fluid temperatures and extend pump life without major modifications.
Less Ideal for: Drivers who routinely tow heavy loads, run long high-speed highway stretches, or need maximum cooling capacity should choose a larger dedicated cooler.
- Compact 2-pass design that fits in tight spaces and is easy to position for airflow
- Copper tubing with aluminum fins provides effective heat transfer for its size
- Painted exterior helps resist corrosion for underhood exposure
- Simple hose barb inlets make it compatible with common hose setups when using adapters or proper hose sizes
- Not a high-capacity cooler so less effective under heavy continuous towing or extreme off-road conditions
- Requires additional hose, clamps, or adapters for some Wrangler setups which adds installation cost and effort
Verdict A small, affordable inline cooler that gives Jeep Wranglers modest steering fluid cooling and pump protection but is not intended for heavy-duty cooling demands.
5. Mopar Power Steering Cooler (68069651AC)
| Brand | Mopar |
|---|---|
| Model | COOLER |
| Exterior | Machined |
| Manufacturer Part Number | 68069651AC |
This Mopar power steering cooler is a factory replacement designed to fit Jeep Wrangler applications and reduce power steering fluid temperatures during towing, off-road use, and heavy steering loads. It installs in the fluid line to increase cooling surface area and help prevent overheating that can cause foaming and premature component wear. As an OEM part it matches factory fit and connections, which simplifies installation and minimizes the need for modifications. The machined exterior suggests durable construction and resistance to road debris. Limitations are a basic, single-function design with no integrated mounting kit or performance tuning features found on dedicated aftermarket coolers, so benefits are largely limited to restoring factory cooling capacity rather than boosting extreme-duty performance.
Best for: Risk-averse mainstream buyers who prioritize factory-quality replacements and reliability for routine and moderate off-road Jeep Wrangler use.
Less Ideal for: Drivers seeking a high-capacity performance upgrade for intense towing or extreme off-road use should consider aftermarket coolers with larger cores and dedicated mounting kits.
- Factory-quality fit that simplifies installation and compatibility with Jeep Wrangler steering lines
- Designed to reduce power steering fluid temperatures during heavy use
- Durable machined exterior better suited to resist road debris than cheap stamped units
- Basic direct-replacement design without upgraded cooling capacity or included performance mounting hardware
- Not intended for extreme-duty cooling upgrades where larger aftermarket coolers are needed
Verdict Choose this OEM Mopar power steering cooler to restore factory cooling reliability on a Jeep Wrangler, but pick a larger aftermarket cooler if you need heavy-duty performance.
6. Aumzong Power Steering Cooler (15009093)
| Manufacturer Part Number | 15009093 |
|---|---|
| Replacement Part Numbers | 918-300, SKTOC049 |
| Compatible Models (listed) | Multiple GM SUVs and trucks 2002–2009 (as specified) |
This Aumzong power steering cooler replaces the factory cooler and routes power steering fluid through a compact heat exchanger to reduce fluid temperature and help prevent leaks and foaming. It is typically installed inline between the power steering pump and steering rack or gear, using the vehicle's existing hoses and clamps. Notable features include factory-replacement fitment for listed GM models, metal construction, and a claimed 100% pre-shipment inspection. In practice the cooler offers a straightforward swap with many owners reporting easy installation and restored performance. Practical benefits are improved fluid cooling under load and a lower chance of power steering fluid breakdown that can lead to leaks. Limitations include fitment specifics—the cooler's male fittings have been reported slightly smaller than some factory ends so you may need new clamps or minor hose work, and some users noted assembly finish that could benefit from reinforcement for long-term durability.
Best for: Practical optimizers looking for a low-cost, functional replacement that restores steering system reliability without unnecessary upgrades.
Less Ideal for: Drivers seeking a heavy-duty performance cooler or a custom high-capacity setup should consider purpose-built aftermarket options instead.
- Designed as a direct replacement for specific factory coolers so fit and routing are straightforward when compatible
- Metal heat-exchanger core provides effective fluid cooling under load
- Many buyers report easy installation and returns to normal steering performance
- Seller performs pre-shipment inspection to reduce defect returns
- Reported minor size differences on male hose ends may require new clamps or slight hose modification
- Finish and assembly quality may not match factory-grade components for long-term heavy-duty use
Verdict A budget-friendly replacement that restores cooling and steering reliability for compatible vehicles but may need minor hose or clamp work for perfect fit.
7. Dorman Power Steering Cooler 918-301
| Material | Alloy Steel |
|---|---|
| Model | 918-301 |
| Manufacturer | Dorman Products |
| Exterior | Machined |
This Dorman power steering cooler is a direct-replacement unit intended to restore cooling capacity and stop leaks on vehicles that use the original-style cooler. It installs in place of the failed cooler and connects to the factory power steering lines; typical use is as a repair part when the original cooler corrodes or develops leaks. Notable features include machined alloy-steel construction and factory-compatible fittings designed to mirror the stock part, which helps simplify bolt-on installation for someone with basic mechanical skills. Practical benefits are improved durability over corroded OE lines, a like-for-like fit that reduces modification or fabrication, and included hoses and clamps for a mostly complete swap. Limitations to be aware of are mixed feedback on hose longevity and the included clamps, which some installers replaced with higher-quality pinch clamps, and the need to verify fitment carefully since the vehicle fit list is limited to specific GM/Cadillac years and trims.
Best for: A balanced all-round buyer who wants a reliable, factory-style repair that restores cooling and prevents leaks while avoiding aftermarket modifications.
Less Ideal for: Not suitable for buyers seeking a universal or custom cooler for vehicles outside the listed GM/Cadillac fitments or for those who want heavy-duty performance upgrades beyond stock cooling capacity.
- Direct replacement designed to match original fit and mounting points
- Alloy steel construction for corrosion resistance compared with rusted originals
- Includes hoses and clamps for a largely complete install
- Machined exterior and factory-style fittings simplify installation
- Some users report the supplied rubber hoses and clamps wear or fail sooner than expected
Verdict A practical, factory-style replacement cooler that restores function and fit for compatible vehicles, though you may want to upgrade the supplied clamps and inspect hoses during installation.
Choosing the Right Jeep Wrangler Power Steering Cooler: Key Factors to Consider
Cooling Capacity and Surface Area
Cooling capacity determines how effectively a cooler lowers steering fluid temperature during sustained use. A larger heat-exchange surface area and efficient fin or plate geometry dissipate heat faster, helping keep fluid viscosity stable and reducing thermal stress on seals and pumps.
When comparing capacity, consider expected load conditions such as trail driving, towing, or stop-and-go traffic. Higher capacity matters more if you routinely run the system hot; for casual driving, a smaller unit may still provide meaningful benefit while being easier to package.
Mounting and Fitment for Jeep Wrangler
Fitment is critical because improper mounting compromises airflow, adds strain to hoses, or creates rubbing points. Look for coolers with brackets that attach to known Wrangler mounting points or that allow adjustable placement in the engine bay or behind the bumper. Properly sized brackets and clearances make installation smoother and keep the cooler from contacting moving parts.
Also consider where the cooler will get airflow. Front-mounted placements exposed to incoming air perform best; locations behind heavy obstruction will reduce effectiveness. Verify hose routing options to avoid tight bends or chafing against chassis components.
Hose and Fitting Quality
Hoses and fittings form the fluid pathway and must withstand higher temperatures and pressures. Reinforced hoses and crimped or threaded fittings reduce the risk of leaks and premature failure. Reliable sealing methods and compatible barb or AN fittings make connections secure and serviceable.
Pay attention to whether adapters or specific hose lengths are included; kits that omit necessary hardware can add complexity. Good-quality fittings also simplify future maintenance and reduce the chance of fluid loss during installation.
Material and Corrosion Resistance
Materials affect durability and heat transfer. Aluminum and copper alloys offer good thermal conductivity, while stainless steel provides durability where exposure to road salt and debris is a concern. Protective finishes, anodizing, or powder coating help resist corrosion and extend service life.
Consider your local climate and how often the vehicle sees off-road or winter use. A cooler with robust corrosion resistance will last longer in harsh environments, preserving both appearance and function.
Installation Complexity and Instructions
Installation difficulty affects how quickly you can get the cooler working and whether you need professional help. Kits with clear instructions, labeled hoses, and included hardware reduce installation time. Some designs require only basic hand tools, while others may need vehicle disassembly or bracket modification.
Also evaluate whether the cooler allows for bleed access and straightforward fluid replacement after fitting. Easier installations lower the risk of installation errors that can cause leaks or poor routing.
Maintenance and Serviceability
A serviceable cooler simplifies long-term ownership. Consider whether the design allows cleaning, inspection for clogs, and replacement of fittings without removing the entire unit. Durable attachment points and accessible hose clamps are helpful when performing routine checks.
Regular inspection of hoses, fittings, and mounting points prevents small issues from becoming failures. Units that facilitate easy maintenance reduce downtime and lower the total cost of ownership.
FAQ
How do I know if my Jeep Wrangler needs a power steering cooler?
You may need a cooler if you notice overheating symptoms such as foamy fluid, a hot smell from the engine bay, reduced steering responsiveness after extended use, or if you frequently tow or off-road. Routine high-load driving that raises fluid temperature is the main indicator that additional cooling could help.
Can I install a power steering cooler myself?
Many Jeep Wrangler power steering coolers are designed for bolt-on installation and can be fitted with common hand tools. Complexity varies by kit; some include vehicle-specific brackets and hardware that simplify the job, while others require more advanced routing or trimming. If you are unsure about routing or fitting, consult a professional.
Will a cooler prevent steering component failure?
A cooler reduces the thermal stress on seals, hoses, and pumps by lowering fluid temperature, which can slow wear and reduce failure risk. It does not eliminate all causes of failure, such as mechanical damage or preexisting component defects. Think of a cooler as a preventive measure that extends service life under high-load conditions.
Where is the best place to mount a power steering cooler on a Jeep Wrangler?
Front-of-vehicle locations with good airflow are typically the most effective, such as behind the grille or in front of the bumper. Mounting near a high-airflow area improves heat dissipation, while secure brackets and adequate clearance prevent contact with moving parts and protect the unit from debris.
Do all coolers require cutting hoses or adding fittings?
Many kits include hoses and fittings sized for straightforward installation, but some require cutting existing lines and adding adapters or inline fittings. It depends on the kit design and whether it is a vehicle-specific assembly. Review the included hardware and planned routing before starting work.
How We Chose the Best Jeep Wrangler Power Steering Cooler
We focused on components designed specifically to reduce steering fluid temperature and improve system longevity for Jeep Wranglers. Selection criteria emphasized cooling capacity measured by surface area and flow-through design, physical fit and mounting options compatible with Wrangler architecture, construction materials and corrosion resistance, hose and fitting quality, and the ease of installation and maintenance. We prioritized products that use proven heat-exchange designs such as stacked-plate or finned-tube configurations and that include durable sealing and attachment hardware. Exclusions applied to universal coolers without clear Wrangler-fit mounting or those lacking necessary hose adapters and quality fittings. We also excluded low-durability units made from thin metals or with questionable welds. The remaining picks balance thermal performance, installation practicality, and long-term durability for typical Wrangler use cases.
Our full evaluation process is outlined in our review methodology.
Conclusion
Selecting the right Jeep Wrangler power steering cooler hinges on balancing thermal performance, fitment, and installation practicality. Prioritize a unit with sufficient cooling capacity and a mounting solution that places the cooler in a high-airflow location without stressing hoses or chassis components. Also factor in durable materials, quality fittings, and ease of service to minimize long-term maintenance. For most drivers who tow or drive aggressively off-road, a well-chosen cooler reduces heat-related wear and helps preserve steering system reliability.
Explore More:
- Check out all Jeep Wrangler parts & accessories
- Explore Cooling System
- Browse all Auto Parts
